Author: chirino
Date: Mon Mar 13 08:41:38 2006
New Revision: 385593
URL: http://svn.apache.org/viewcvs?rev=385593&view=rev
Log:
set the eol style so that it matches the platform they are targeted for.
Modified:
incubator/activemq/trunk/assembly/src/release/bin/activemq (props changed)
incubator/activemq/trunk/assembly/src/release/bin/activemq.bat (contents,
props changed)
incubator/activemq/trunk/assembly/src/release/bin/browse (props changed)
incubator/activemq/trunk/assembly/src/release/bin/browse.bat (contents,
props changed)
incubator/activemq/trunk/assembly/src/release/bin/bstat (props changed)
incubator/activemq/trunk/assembly/src/release/bin/bstat.bat (contents,
props changed)
incubator/activemq/trunk/assembly/src/release/bin/lcp.bat (contents,
props changed)
incubator/activemq/trunk/assembly/src/release/bin/list (props changed)
incubator/activemq/trunk/assembly/src/release/bin/list.bat (contents,
props changed)
incubator/activemq/trunk/assembly/src/release/bin/query (props changed)
incubator/activemq/trunk/assembly/src/release/bin/query.bat (contents,
props changed)
incubator/activemq/trunk/assembly/src/release/bin/shutdown (props changed)
incubator/activemq/trunk/assembly/src/release/bin/shutdown.bat (contents,
props changed)
Propchange: incubator/activemq/trunk/assembly/src/release/bin/activemq
------------------------------------------------------------------------------
svn:eol-style = LF
Modified: incubator/activemq/trunk/assembly/src/release/bin/activemq.bat
URL:
http://svn.apache.org/viewcvs/incubator/activemq/trunk/assembly/src/release/bin/activemq.bat?rev=385593&r1=385592&r2=385593&view=diff
==============================================================================
--- incubator/activemq/trunk/assembly/src/release/bin/activemq.bat (original)
+++ incubator/activemq/trunk/assembly/src/release/bin/activemq.bat Mon Mar 13
08:41:38 2006
@@ -1,119 +1,119 @@
[EMAIL PROTECTED] off
-
-REM ActiveMQ shell script
-REM
-REM $Id: activemq.bat,v 1.1.1.1 2005/03/11 21:14:04 jstrachan Exp $
-REM
-REM This script is heavily based on the Ant script
-REM
-REM Copyright 2005-2006 The Apache Software Foundation
-REM
-REM Licensed under the Apache License, Version 2.0 (the "License");
-REM you may not use this file except in compliance with the License.
-REM You may obtain a copy of the License at
-REM
-REM http://www.apache.org/licenses/LICENSE-2.0
-REM
-REM Unless required by applicable law or agreed to in writing, software
-REM distributed under the License is distributed on an "AS IS" BASIS,
-REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-REM See the License for the specific language governing permissions and
-REM limitations under the License.
-
-if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
-
-if "%OS%"=="Windows_NT" @setlocal
-
-rem %~dp0 is expanded pathname of the current script under NT
-set DEFAULT_ACTIVEMQ_HOME=%~dp0..
-
-if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
-set DEFAULT_ACTIVEMQ_HOME=
-
-rem Slurp the command line arguments. This loop allows for an unlimited number
-rem of arguments (up to the command line limit, anyway).
-set ACTIVEMQ_CMD_LINE_ARGS=%1
-if ""%1""=="""" goto doneStart
-shift
-:setupArgs
-if ""%1""=="""" goto doneStart
-set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
-shift
-goto setupArgs
-rem This label provides a place for the argument list loop to break out
-rem and for NT handling to skip to.
-
-:doneStart
-rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
-rem by the user or the %0 problem on Windows 9x
-if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
-
-rem check for activemq in Program Files on system drive
-if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
-set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
-goto checkJava
-
-:checkSystemDrive
-rem check for activemq in root directory of system drive
-if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
-set ACTIVEMQ_HOME=%SystemDrive%\activemq
-goto checkJava
-
-:checkCDrive
-rem check for activemq in C:\activemq for Win9X users
-if not exist C:\activemq\README.txt goto noAntHome
-set ACTIVEMQ_HOME=C:\activemq
-goto checkJava
-
-:noAntHome
-echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
-goto end
-
-:checkJava
-set _JAVACMD=%JAVACMD%
-set LOCALCLASSPATH=%CLASSPATH%
-
-set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
-
-if "%JAVA_HOME%" == "" goto noJavaHome
-if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
-goto runAnt
-
-:noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=java.exe
-echo.
-echo Warning: JAVA_HOME environment variable is not set.
-echo.
-
-:runAnt
-
-if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
-
-set SUNJMX=
-REM set SUNJMX=-Dcom.sun.management.jmxremote.port=1616
-Dcom.sun.management.jmxremote.authenticate=false
-Dcom.sun.management.jmxremote.ssl=false
-
-REM Uncomment to enable YourKit profiling
-REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
-
-REM Uncomment to enable remote debugging
-REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
-
-set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
-
-set ACTIVEMQ_TASK="start"
-"%_JAVACMD%" %SUNJMX% %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Dactivemq.home="%ACTIVEMQ_HOME%" -jar %ACTIVEMQ_HOME%/bin/run.jar
%ACTIVEMQ_TASK% %ACTIVEMQ_CMD_LINE_ARGS%
-
-goto end
-
-
-:end
-set LOCALCLASSPATH=
-set _JAVACMD=
-set ACTIVEMQ_CMD_LINE_ARGS=
-
-if "%OS%"=="Windows_NT" @endlocal
-
-:mainEnd
-if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
-
[EMAIL PROTECTED] off
+
+REM ActiveMQ shell script
+REM
+REM $Id: activemq.bat,v 1.1.1.1 2005/03/11 21:14:04 jstrachan Exp $
+REM
+REM This script is heavily based on the Ant script
+REM
+REM Copyright 2005-2006 The Apache Software Foundation
+REM
+REM Licensed under the Apache License, Version 2.0 (the "License");
+REM you may not use this file except in compliance with the License.
+REM You may obtain a copy of the License at
+REM
+REM http://www.apache.org/licenses/LICENSE-2.0
+REM
+REM Unless required by applicable law or agreed to in writing, software
+REM distributed under the License is distributed on an "AS IS" BASIS,
+REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+REM See the License for the specific language governing permissions and
+REM limitations under the License.
+
+if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
+
+if "%OS%"=="Windows_NT" @setlocal
+
+rem %~dp0 is expanded pathname of the current script under NT
+set DEFAULT_ACTIVEMQ_HOME=%~dp0..
+
+if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
+set DEFAULT_ACTIVEMQ_HOME=
+
+rem Slurp the command line arguments. This loop allows for an unlimited number
+rem of arguments (up to the command line limit, anyway).
+set ACTIVEMQ_CMD_LINE_ARGS=%1
+if ""%1""=="""" goto doneStart
+shift
+:setupArgs
+if ""%1""=="""" goto doneStart
+set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
+shift
+goto setupArgs
+rem This label provides a place for the argument list loop to break out
+rem and for NT handling to skip to.
+
+:doneStart
+rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
+rem by the user or the %0 problem on Windows 9x
+if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
+
+rem check for activemq in Program Files on system drive
+if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
+set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
+goto checkJava
+
+:checkSystemDrive
+rem check for activemq in root directory of system drive
+if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
+set ACTIVEMQ_HOME=%SystemDrive%\activemq
+goto checkJava
+
+:checkCDrive
+rem check for activemq in C:\activemq for Win9X users
+if not exist C:\activemq\README.txt goto noAntHome
+set ACTIVEMQ_HOME=C:\activemq
+goto checkJava
+
+:noAntHome
+echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
+goto end
+
+:checkJava
+set _JAVACMD=%JAVACMD%
+set LOCALCLASSPATH=%CLASSPATH%
+
+set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
+
+if "%JAVA_HOME%" == "" goto noJavaHome
+if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
+goto runAnt
+
+:noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=java.exe
+echo.
+echo Warning: JAVA_HOME environment variable is not set.
+echo.
+
+:runAnt
+
+if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
+
+set SUNJMX=
+REM set SUNJMX=-Dcom.sun.management.jmxremote.port=1616
-Dcom.sun.management.jmxremote.authenticate=false
-Dcom.sun.management.jmxremote.ssl=false
+
+REM Uncomment to enable YourKit profiling
+REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
+
+REM Uncomment to enable remote debugging
+REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
+
+set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
+
+set ACTIVEMQ_TASK="start"
+"%_JAVACMD%" %SUNJMX% %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Dactivemq.home="%ACTIVEMQ_HOME%" -jar %ACTIVEMQ_HOME%/bin/run.jar
%ACTIVEMQ_TASK% %ACTIVEMQ_CMD_LINE_ARGS%
+
+goto end
+
+
+:end
+set LOCALCLASSPATH=
+set _JAVACMD=
+set ACTIVEMQ_CMD_LINE_ARGS=
+
+if "%OS%"=="Windows_NT" @endlocal
+
+:mainEnd
+if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
+
Propchange: incubator/activemq/trunk/assembly/src/release/bin/activemq.bat
------------------------------------------------------------------------------
--- svn:eol-style (original)
+++ svn:eol-style Mon Mar 13 08:41:38 2006
@@ -1 +1 @@
-native
+CRLF
Propchange: incubator/activemq/trunk/assembly/src/release/bin/browse
------------------------------------------------------------------------------
svn:eol-style = LF
Modified: incubator/activemq/trunk/assembly/src/release/bin/browse.bat
URL:
http://svn.apache.org/viewcvs/incubator/activemq/trunk/assembly/src/release/bin/browse.bat?rev=385593&r1=385592&r2=385593&view=diff
==============================================================================
--- incubator/activemq/trunk/assembly/src/release/bin/browse.bat (original)
+++ incubator/activemq/trunk/assembly/src/release/bin/browse.bat Mon Mar 13
08:41:38 2006
@@ -1,115 +1,115 @@
[EMAIL PROTECTED] off
-
-REM ActiveMQ shell script
-REM
-REM This script is heavily based on the Ant script
-REM
-REM Copyright 2005-2006 The Apache Software Foundation
-REM
-REM Licensed under the Apache License, Version 2.0 (the "License");
-REM you may not use this file except in compliance with the License.
-REM You may obtain a copy of the License at
-REM
-REM http://www.apache.org/licenses/LICENSE-2.0
-REM
-REM Unless required by applicable law or agreed to in writing, software
-REM distributed under the License is distributed on an "AS IS" BASIS,
-REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-REM See the License for the specific language governing permissions and
-REM limitations under the License.
-
-if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
-
-if "%OS%"=="Windows_NT" @setlocal
-
-rem %~dp0 is expanded pathname of the current script under NT
-set DEFAULT_ACTIVEMQ_HOME=%~dp0..
-
-if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
-set DEFAULT_ACTIVEMQ_HOME=
-
-rem Slurp the command line arguments. This loop allows for an unlimited number
-rem of arguments (up to the command line limit, anyway).
-set ACTIVEMQ_CMD_LINE_ARGS=%1
-if ""%1""=="""" goto doneStart
-shift
-:setupArgs
-if ""%1""=="""" goto doneStart
-set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
-shift
-goto setupArgs
-rem This label provides a place for the argument list loop to break out
-rem and for NT handling to skip to.
-
-:doneStart
-rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
-rem by the user or the %0 problem on Windows 9x
-if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
-
-rem check for activemq in Program Files on system drive
-if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
-set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
-goto checkJava
-
-:checkSystemDrive
-rem check for activemq in root directory of system drive
-if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
-set ACTIVEMQ_HOME=%SystemDrive%\activemq
-goto checkJava
-
-:checkCDrive
-rem check for activemq in C:\activemq for Win9X users
-if not exist C:\activemq\README.txt goto noAntHome
-set ACTIVEMQ_HOME=C:\activemq
-goto checkJava
-
-:noAntHome
-echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
-goto end
-
-:checkJava
-set _JAVACMD=%JAVACMD%
-set LOCALCLASSPATH=%CLASSPATH%
-
-set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
-
-if "%JAVA_HOME%" == "" goto noJavaHome
-if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
-goto runAnt
-
-:noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=java.exe
-echo.
-echo Warning: JAVA_HOME environment variable is not set.
-echo.
-
-:runAnt
-
-if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
-
-REM Uncomment to enable YourKit profiling
-REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
-
-REM Uncomment to enable remote debugging
-REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
-
-set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
-
-set ACTIVEMQ_TASK="browse"
-"%_JAVACMD%" %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Djava.ext.dirs="%JAVA_EXT_DIRS%" -classpath "%LOCALCLASSPATH%" -jar
%ACTIVEMQ_HOME%/bin/run.jar %ACTIVEMQ_TASK% %ACTIVEMQ_CMD_LINE_ARGS%
-
-
-goto end
-
-
-:end
-set LOCALCLASSPATH=
-set _JAVACMD=
-set ACTIVEMQ_CMD_LINE_ARGS=
-
-if "%OS%"=="Windows_NT" @endlocal
-
-:mainEnd
-if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
-
[EMAIL PROTECTED] off
+
+REM ActiveMQ shell script
+REM
+REM This script is heavily based on the Ant script
+REM
+REM Copyright 2005-2006 The Apache Software Foundation
+REM
+REM Licensed under the Apache License, Version 2.0 (the "License");
+REM you may not use this file except in compliance with the License.
+REM You may obtain a copy of the License at
+REM
+REM http://www.apache.org/licenses/LICENSE-2.0
+REM
+REM Unless required by applicable law or agreed to in writing, software
+REM distributed under the License is distributed on an "AS IS" BASIS,
+REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+REM See the License for the specific language governing permissions and
+REM limitations under the License.
+
+if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
+
+if "%OS%"=="Windows_NT" @setlocal
+
+rem %~dp0 is expanded pathname of the current script under NT
+set DEFAULT_ACTIVEMQ_HOME=%~dp0..
+
+if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
+set DEFAULT_ACTIVEMQ_HOME=
+
+rem Slurp the command line arguments. This loop allows for an unlimited number
+rem of arguments (up to the command line limit, anyway).
+set ACTIVEMQ_CMD_LINE_ARGS=%1
+if ""%1""=="""" goto doneStart
+shift
+:setupArgs
+if ""%1""=="""" goto doneStart
+set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
+shift
+goto setupArgs
+rem This label provides a place for the argument list loop to break out
+rem and for NT handling to skip to.
+
+:doneStart
+rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
+rem by the user or the %0 problem on Windows 9x
+if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
+
+rem check for activemq in Program Files on system drive
+if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
+set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
+goto checkJava
+
+:checkSystemDrive
+rem check for activemq in root directory of system drive
+if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
+set ACTIVEMQ_HOME=%SystemDrive%\activemq
+goto checkJava
+
+:checkCDrive
+rem check for activemq in C:\activemq for Win9X users
+if not exist C:\activemq\README.txt goto noAntHome
+set ACTIVEMQ_HOME=C:\activemq
+goto checkJava
+
+:noAntHome
+echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
+goto end
+
+:checkJava
+set _JAVACMD=%JAVACMD%
+set LOCALCLASSPATH=%CLASSPATH%
+
+set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
+
+if "%JAVA_HOME%" == "" goto noJavaHome
+if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
+goto runAnt
+
+:noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=java.exe
+echo.
+echo Warning: JAVA_HOME environment variable is not set.
+echo.
+
+:runAnt
+
+if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
+
+REM Uncomment to enable YourKit profiling
+REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
+
+REM Uncomment to enable remote debugging
+REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
+
+set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
+
+set ACTIVEMQ_TASK="browse"
+"%_JAVACMD%" %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Djava.ext.dirs="%JAVA_EXT_DIRS%" -classpath "%LOCALCLASSPATH%" -jar
%ACTIVEMQ_HOME%/bin/run.jar %ACTIVEMQ_TASK% %ACTIVEMQ_CMD_LINE_ARGS%
+
+
+goto end
+
+
+:end
+set LOCALCLASSPATH=
+set _JAVACMD=
+set ACTIVEMQ_CMD_LINE_ARGS=
+
+if "%OS%"=="Windows_NT" @endlocal
+
+:mainEnd
+if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
+
Propchange: incubator/activemq/trunk/assembly/src/release/bin/browse.bat
------------------------------------------------------------------------------
--- svn:eol-style (original)
+++ svn:eol-style Mon Mar 13 08:41:38 2006
@@ -1 +1 @@
-native
+CRLF
Propchange: incubator/activemq/trunk/assembly/src/release/bin/bstat
------------------------------------------------------------------------------
svn:eol-style = LF
Modified: incubator/activemq/trunk/assembly/src/release/bin/bstat.bat
URL:
http://svn.apache.org/viewcvs/incubator/activemq/trunk/assembly/src/release/bin/bstat.bat?rev=385593&r1=385592&r2=385593&view=diff
==============================================================================
--- incubator/activemq/trunk/assembly/src/release/bin/bstat.bat (original)
+++ incubator/activemq/trunk/assembly/src/release/bin/bstat.bat Mon Mar 13
08:41:38 2006
@@ -1,127 +1,127 @@
[EMAIL PROTECTED] off
-
-REM ActiveMQ shell script
-REM
-REM This script is heavily based on the Ant script
-REM
-REM Copyright 2005-2006 The Apache Software Foundation
-REM
-REM Licensed under the Apache License, Version 2.0 (the "License");
-REM you may not use this file except in compliance with the License.
-REM You may obtain a copy of the License at
-REM
-REM http://www.apache.org/licenses/LICENSE-2.0
-REM
-REM Unless required by applicable law or agreed to in writing, software
-REM distributed under the License is distributed on an "AS IS" BASIS,
-REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-REM See the License for the specific language governing permissions and
-REM limitations under the License.
-
-if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
-
-if "%OS%"=="Windows_NT" @setlocal
-
-rem %~dp0 is expanded pathname of the current script under NT
-set DEFAULT_ACTIVEMQ_HOME=%~dp0..
-
-if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
-set DEFAULT_ACTIVEMQ_HOME=
-
-rem Assume first parameter is broker name
-set BROKER_NAME=%1
-if "%BROKER_NAME%" == "" set BROKER_NAME=*
-shift
-
-rem Slurp the command line arguments. This loop allows for an unlimited number
-rem of arguments (up to the command line limit, anyway).
-
-set ACTIVEMQ_CMD_LINE_ARGS=%1
-if ""%1""=="""" goto doneStart
-shift
-:setupArgs
-if ""%1""=="""" goto doneStart
-set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
-shift
-goto setupArgs
-
-rem This label provides a place for the argument list loop to break out
-rem and for NT handling to skip to.
-
-:doneStart
-rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
-rem by the user or the %0 problem on Windows 9x
-if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
-
-rem check for activemq in Program Files on system drive
-if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
-set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
-goto checkJava
-
-:checkSystemDrive
-rem check for activemq in root directory of system drive
-if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
-set ACTIVEMQ_HOME=%SystemDrive%\activemq
-goto checkJava
-
-:checkCDrive
-rem check for activemq in C:\activemq for Win9X users
-if not exist C:\activemq\README.txt goto noAntHome
-set ACTIVEMQ_HOME=C:\activemq
-goto checkJava
-
-:noAntHome
-echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
-goto end
-
-:checkJava
-set _JAVACMD=%JAVACMD%
-set LOCALCLASSPATH=%CLASSPATH%
-
-set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
-
-if "%JAVA_HOME%" == "" goto noJavaHome
-if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
-goto runAnt
-
-:noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=java.exe
-echo.
-echo Warning: JAVA_HOME environment variable is not set.
-echo.
-
-:runAnt
-
-if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
-
-REM Uncomment to enable YourKit profiling
-REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
-
-REM Uncomment to enable remote debugging
-REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
-
-set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
-
-set ACTIVEMQ_TASK="query"
-
-rem Select all components that belongs to the specified broker except advisory
topics
-rem and display the specified attributes
-set QUERY_PARAM=--objname "Type=*,BrokerName=%BROKER_NAME%"
"-xQTopic=ActiveMQ.Advisory.*" --view
"Type,BrokerName,Destination,ConnectorName,EnqueueCount,DequeueCount,TotalEnqueueCount,TotalDequeueCount,Messages,TotalMessages,ConsumerCount,TotalConsumerCount,DispatchQueueSize"
-
-"%_JAVACMD%" %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Djava.ext.dirs="%JAVA_EXT_DIRS%" -classpath "%LOCALCLASSPATH%" -jar
%ACTIVEMQ_HOME%/bin/run.jar %ACTIVEMQ_TASK% %QUERY_PARAM%
%ACTIVEMQ_CMD_LINE_ARGS%
-
-
-goto end
-
-
-:end
-set LOCALCLASSPATH=
-set _JAVACMD=
-set ACTIVEMQ_CMD_LINE_ARGS=
-
-if "%OS%"=="Windows_NT" @endlocal
-
-:mainEnd
-if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
-
[EMAIL PROTECTED] off
+
+REM ActiveMQ shell script
+REM
+REM This script is heavily based on the Ant script
+REM
+REM Copyright 2005-2006 The Apache Software Foundation
+REM
+REM Licensed under the Apache License, Version 2.0 (the "License");
+REM you may not use this file except in compliance with the License.
+REM You may obtain a copy of the License at
+REM
+REM http://www.apache.org/licenses/LICENSE-2.0
+REM
+REM Unless required by applicable law or agreed to in writing, software
+REM distributed under the License is distributed on an "AS IS" BASIS,
+REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+REM See the License for the specific language governing permissions and
+REM limitations under the License.
+
+if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
+
+if "%OS%"=="Windows_NT" @setlocal
+
+rem %~dp0 is expanded pathname of the current script under NT
+set DEFAULT_ACTIVEMQ_HOME=%~dp0..
+
+if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
+set DEFAULT_ACTIVEMQ_HOME=
+
+rem Assume first parameter is broker name
+set BROKER_NAME=%1
+if "%BROKER_NAME%" == "" set BROKER_NAME=*
+shift
+
+rem Slurp the command line arguments. This loop allows for an unlimited number
+rem of arguments (up to the command line limit, anyway).
+
+set ACTIVEMQ_CMD_LINE_ARGS=%1
+if ""%1""=="""" goto doneStart
+shift
+:setupArgs
+if ""%1""=="""" goto doneStart
+set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
+shift
+goto setupArgs
+
+rem This label provides a place for the argument list loop to break out
+rem and for NT handling to skip to.
+
+:doneStart
+rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
+rem by the user or the %0 problem on Windows 9x
+if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
+
+rem check for activemq in Program Files on system drive
+if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
+set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
+goto checkJava
+
+:checkSystemDrive
+rem check for activemq in root directory of system drive
+if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
+set ACTIVEMQ_HOME=%SystemDrive%\activemq
+goto checkJava
+
+:checkCDrive
+rem check for activemq in C:\activemq for Win9X users
+if not exist C:\activemq\README.txt goto noAntHome
+set ACTIVEMQ_HOME=C:\activemq
+goto checkJava
+
+:noAntHome
+echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
+goto end
+
+:checkJava
+set _JAVACMD=%JAVACMD%
+set LOCALCLASSPATH=%CLASSPATH%
+
+set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
+
+if "%JAVA_HOME%" == "" goto noJavaHome
+if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
+goto runAnt
+
+:noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=java.exe
+echo.
+echo Warning: JAVA_HOME environment variable is not set.
+echo.
+
+:runAnt
+
+if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
+
+REM Uncomment to enable YourKit profiling
+REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
+
+REM Uncomment to enable remote debugging
+REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
+
+set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
+
+set ACTIVEMQ_TASK="query"
+
+rem Select all components that belongs to the specified broker except advisory
topics
+rem and display the specified attributes
+set QUERY_PARAM=--objname "Type=*,BrokerName=%BROKER_NAME%"
"-xQTopic=ActiveMQ.Advisory.*" --view
"Type,BrokerName,Destination,ConnectorName,EnqueueCount,DequeueCount,TotalEnqueueCount,TotalDequeueCount,Messages,TotalMessages,ConsumerCount,TotalConsumerCount,DispatchQueueSize"
+
+"%_JAVACMD%" %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Djava.ext.dirs="%JAVA_EXT_DIRS%" -classpath "%LOCALCLASSPATH%" -jar
%ACTIVEMQ_HOME%/bin/run.jar %ACTIVEMQ_TASK% %QUERY_PARAM%
%ACTIVEMQ_CMD_LINE_ARGS%
+
+
+goto end
+
+
+:end
+set LOCALCLASSPATH=
+set _JAVACMD=
+set ACTIVEMQ_CMD_LINE_ARGS=
+
+if "%OS%"=="Windows_NT" @endlocal
+
+:mainEnd
+if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
+
Propchange: incubator/activemq/trunk/assembly/src/release/bin/bstat.bat
------------------------------------------------------------------------------
--- svn:eol-style (original)
+++ svn:eol-style Mon Mar 13 08:41:38 2006
@@ -1 +1 @@
-native
+CRLF
Modified: incubator/activemq/trunk/assembly/src/release/bin/lcp.bat
URL:
http://svn.apache.org/viewcvs/incubator/activemq/trunk/assembly/src/release/bin/lcp.bat?rev=385593&r1=385592&r2=385593&view=diff
==============================================================================
--- incubator/activemq/trunk/assembly/src/release/bin/lcp.bat (original)
+++ incubator/activemq/trunk/assembly/src/release/bin/lcp.bat Mon Mar 13
08:41:38 2006
@@ -1,27 +1,27 @@
-REM Copyright 2005-2006 The Apache Software Foundation
-REM
-REM Licensed under the Apache License, Version 2.0 (the "License");
-REM you may not use this file except in compliance with the License.
-REM You may obtain a copy of the License at
-REM
-REM http://www.apache.org/licenses/LICENSE-2.0
-REM
-REM Unless required by applicable law or agreed to in writing, software
-REM distributed under the License is distributed on an "AS IS" BASIS,
-REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-REM See the License for the specific language governing permissions and
-REM limitations under the License.
-
-set _CLASSPATHCOMPONENT=%1
-if ""%1""=="""" goto gotAllArgs
-shift
-
-:argCheck
-if ""%1""=="""" goto gotAllArgs
-set _CLASSPATHCOMPONENT=%_CLASSPATHCOMPONENT% %1
-shift
-goto argCheck
-
-:gotAllArgs
-set LOCALCLASSPATH=%_CLASSPATHCOMPONENT%;%LOCALCLASSPATH%
-
+REM Copyright 2005-2006 The Apache Software Foundation
+REM
+REM Licensed under the Apache License, Version 2.0 (the "License");
+REM you may not use this file except in compliance with the License.
+REM You may obtain a copy of the License at
+REM
+REM http://www.apache.org/licenses/LICENSE-2.0
+REM
+REM Unless required by applicable law or agreed to in writing, software
+REM distributed under the License is distributed on an "AS IS" BASIS,
+REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+REM See the License for the specific language governing permissions and
+REM limitations under the License.
+
+set _CLASSPATHCOMPONENT=%1
+if ""%1""=="""" goto gotAllArgs
+shift
+
+:argCheck
+if ""%1""=="""" goto gotAllArgs
+set _CLASSPATHCOMPONENT=%_CLASSPATHCOMPONENT% %1
+shift
+goto argCheck
+
+:gotAllArgs
+set LOCALCLASSPATH=%_CLASSPATHCOMPONENT%;%LOCALCLASSPATH%
+
Propchange: incubator/activemq/trunk/assembly/src/release/bin/lcp.bat
------------------------------------------------------------------------------
--- svn:eol-style (original)
+++ svn:eol-style Mon Mar 13 08:41:38 2006
@@ -1 +1 @@
-native
+CRLF
Propchange: incubator/activemq/trunk/assembly/src/release/bin/list
------------------------------------------------------------------------------
svn:eol-style = LF
Modified: incubator/activemq/trunk/assembly/src/release/bin/list.bat
URL:
http://svn.apache.org/viewcvs/incubator/activemq/trunk/assembly/src/release/bin/list.bat?rev=385593&r1=385592&r2=385593&view=diff
==============================================================================
--- incubator/activemq/trunk/assembly/src/release/bin/list.bat (original)
+++ incubator/activemq/trunk/assembly/src/release/bin/list.bat Mon Mar 13
08:41:38 2006
@@ -1,115 +1,115 @@
[EMAIL PROTECTED] off
-
-REM ActiveMQ shell script
-REM
-REM This script is heavily based on the Ant script
-REM
-REM Copyright 2005-2006 The Apache Software Foundation
-REM
-REM Licensed under the Apache License, Version 2.0 (the "License");
-REM you may not use this file except in compliance with the License.
-REM You may obtain a copy of the License at
-REM
-REM http://www.apache.org/licenses/LICENSE-2.0
-REM
-REM Unless required by applicable law or agreed to in writing, software
-REM distributed under the License is distributed on an "AS IS" BASIS,
-REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-REM See the License for the specific language governing permissions and
-REM limitations under the License.
-
-if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
-
-if "%OS%"=="Windows_NT" @setlocal
-
-rem %~dp0 is expanded pathname of the current script under NT
-set DEFAULT_ACTIVEMQ_HOME=%~dp0..
-
-if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
-set DEFAULT_ACTIVEMQ_HOME=
-
-rem Slurp the command line arguments. This loop allows for an unlimited number
-rem of arguments (up to the command line limit, anyway).
-set ACTIVEMQ_CMD_LINE_ARGS=%1
-if ""%1""=="""" goto doneStart
-shift
-:setupArgs
-if ""%1""=="""" goto doneStart
-set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
-shift
-goto setupArgs
-rem This label provides a place for the argument list loop to break out
-rem and for NT handling to skip to.
-
-:doneStart
-rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
-rem by the user or the %0 problem on Windows 9x
-if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
-
-rem check for activemq in Program Files on system drive
-if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
-set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
-goto checkJava
-
-:checkSystemDrive
-rem check for activemq in root directory of system drive
-if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
-set ACTIVEMQ_HOME=%SystemDrive%\activemq
-goto checkJava
-
-:checkCDrive
-rem check for activemq in C:\activemq for Win9X users
-if not exist C:\activemq\README.txt goto noAntHome
-set ACTIVEMQ_HOME=C:\activemq
-goto checkJava
-
-:noAntHome
-echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
-goto end
-
-:checkJava
-set _JAVACMD=%JAVACMD%
-set LOCALCLASSPATH=%CLASSPATH%
-
-set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
-
-if "%JAVA_HOME%" == "" goto noJavaHome
-if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
-goto runAnt
-
-:noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=java.exe
-echo.
-echo Warning: JAVA_HOME environment variable is not set.
-echo.
-
-:runAnt
-
-if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
-
-REM Uncomment to enable YourKit profiling
-REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
-
-REM Uncomment to enable remote debugging
-REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
-
-set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
-
-set ACTIVEMQ_TASK="list"
-"%_JAVACMD%" %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Djava.ext.dirs="%JAVA_EXT_DIRS%" -classpath "%LOCALCLASSPATH%" -jar
%ACTIVEMQ_HOME%/bin/run.jar %ACTIVEMQ_TASK% %ACTIVEMQ_CMD_LINE_ARGS%
-
-
-goto end
-
-
-:end
-set LOCALCLASSPATH=
-set _JAVACMD=
-set ACTIVEMQ_CMD_LINE_ARGS=
-
-if "%OS%"=="Windows_NT" @endlocal
-
-:mainEnd
-if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
-
[EMAIL PROTECTED] off
+
+REM ActiveMQ shell script
+REM
+REM This script is heavily based on the Ant script
+REM
+REM Copyright 2005-2006 The Apache Software Foundation
+REM
+REM Licensed under the Apache License, Version 2.0 (the "License");
+REM you may not use this file except in compliance with the License.
+REM You may obtain a copy of the License at
+REM
+REM http://www.apache.org/licenses/LICENSE-2.0
+REM
+REM Unless required by applicable law or agreed to in writing, software
+REM distributed under the License is distributed on an "AS IS" BASIS,
+REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+REM See the License for the specific language governing permissions and
+REM limitations under the License.
+
+if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
+
+if "%OS%"=="Windows_NT" @setlocal
+
+rem %~dp0 is expanded pathname of the current script under NT
+set DEFAULT_ACTIVEMQ_HOME=%~dp0..
+
+if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
+set DEFAULT_ACTIVEMQ_HOME=
+
+rem Slurp the command line arguments. This loop allows for an unlimited number
+rem of arguments (up to the command line limit, anyway).
+set ACTIVEMQ_CMD_LINE_ARGS=%1
+if ""%1""=="""" goto doneStart
+shift
+:setupArgs
+if ""%1""=="""" goto doneStart
+set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
+shift
+goto setupArgs
+rem This label provides a place for the argument list loop to break out
+rem and for NT handling to skip to.
+
+:doneStart
+rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
+rem by the user or the %0 problem on Windows 9x
+if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
+
+rem check for activemq in Program Files on system drive
+if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
+set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
+goto checkJava
+
+:checkSystemDrive
+rem check for activemq in root directory of system drive
+if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
+set ACTIVEMQ_HOME=%SystemDrive%\activemq
+goto checkJava
+
+:checkCDrive
+rem check for activemq in C:\activemq for Win9X users
+if not exist C:\activemq\README.txt goto noAntHome
+set ACTIVEMQ_HOME=C:\activemq
+goto checkJava
+
+:noAntHome
+echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
+goto end
+
+:checkJava
+set _JAVACMD=%JAVACMD%
+set LOCALCLASSPATH=%CLASSPATH%
+
+set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
+
+if "%JAVA_HOME%" == "" goto noJavaHome
+if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
+goto runAnt
+
+:noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=java.exe
+echo.
+echo Warning: JAVA_HOME environment variable is not set.
+echo.
+
+:runAnt
+
+if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
+
+REM Uncomment to enable YourKit profiling
+REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
+
+REM Uncomment to enable remote debugging
+REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
+
+set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
+
+set ACTIVEMQ_TASK="list"
+"%_JAVACMD%" %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Djava.ext.dirs="%JAVA_EXT_DIRS%" -classpath "%LOCALCLASSPATH%" -jar
%ACTIVEMQ_HOME%/bin/run.jar %ACTIVEMQ_TASK% %ACTIVEMQ_CMD_LINE_ARGS%
+
+
+goto end
+
+
+:end
+set LOCALCLASSPATH=
+set _JAVACMD=
+set ACTIVEMQ_CMD_LINE_ARGS=
+
+if "%OS%"=="Windows_NT" @endlocal
+
+:mainEnd
+if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
+
Propchange: incubator/activemq/trunk/assembly/src/release/bin/list.bat
------------------------------------------------------------------------------
--- svn:eol-style (original)
+++ svn:eol-style Mon Mar 13 08:41:38 2006
@@ -1 +1 @@
-native
+CRLF
Propchange: incubator/activemq/trunk/assembly/src/release/bin/query
------------------------------------------------------------------------------
svn:eol-style = LF
Modified: incubator/activemq/trunk/assembly/src/release/bin/query.bat
URL:
http://svn.apache.org/viewcvs/incubator/activemq/trunk/assembly/src/release/bin/query.bat?rev=385593&r1=385592&r2=385593&view=diff
==============================================================================
--- incubator/activemq/trunk/assembly/src/release/bin/query.bat (original)
+++ incubator/activemq/trunk/assembly/src/release/bin/query.bat Mon Mar 13
08:41:38 2006
@@ -1,115 +1,115 @@
[EMAIL PROTECTED] off
-
-REM ActiveMQ shell script
-REM
-REM This script is heavily based on the Ant script
-REM
-REM Copyright 2005-2006 The Apache Software Foundation
-REM
-REM Licensed under the Apache License, Version 2.0 (the "License");
-REM you may not use this file except in compliance with the License.
-REM You may obtain a copy of the License at
-REM
-REM http://www.apache.org/licenses/LICENSE-2.0
-REM
-REM Unless required by applicable law or agreed to in writing, software
-REM distributed under the License is distributed on an "AS IS" BASIS,
-REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-REM See the License for the specific language governing permissions and
-REM limitations under the License.
-
-if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
-
-if "%OS%"=="Windows_NT" @setlocal
-
-rem %~dp0 is expanded pathname of the current script under NT
-set DEFAULT_ACTIVEMQ_HOME=%~dp0..
-
-if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
-set DEFAULT_ACTIVEMQ_HOME=
-
-rem Slurp the command line arguments. This loop allows for an unlimited number
-rem of arguments (up to the command line limit, anyway).
-set ACTIVEMQ_CMD_LINE_ARGS=%1
-if ""%1""=="""" goto doneStart
-shift
-:setupArgs
-if ""%1""=="""" goto doneStart
-set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
-shift
-goto setupArgs
-rem This label provides a place for the argument list loop to break out
-rem and for NT handling to skip to.
-
-:doneStart
-rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
-rem by the user or the %0 problem on Windows 9x
-if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
-
-rem check for activemq in Program Files on system drive
-if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
-set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
-goto checkJava
-
-:checkSystemDrive
-rem check for activemq in root directory of system drive
-if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
-set ACTIVEMQ_HOME=%SystemDrive%\activemq
-goto checkJava
-
-:checkCDrive
-rem check for activemq in C:\activemq for Win9X users
-if not exist C:\activemq\README.txt goto noAntHome
-set ACTIVEMQ_HOME=C:\activemq
-goto checkJava
-
-:noAntHome
-echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
-goto end
-
-:checkJava
-set _JAVACMD=%JAVACMD%
-set LOCALCLASSPATH=%CLASSPATH%
-
-set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
-
-if "%JAVA_HOME%" == "" goto noJavaHome
-if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
-goto runAnt
-
-:noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=java.exe
-echo.
-echo Warning: JAVA_HOME environment variable is not set.
-echo.
-
-:runAnt
-
-if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
-
-REM Uncomment to enable YourKit profiling
-REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
-
-REM Uncomment to enable remote debugging
-REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
-
-set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
-
-set ACTIVEMQ_TASK="query"
-"%_JAVACMD%" %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Djava.ext.dirs="%JAVA_EXT_DIRS%" -classpath "%LOCALCLASSPATH%" -jar
%ACTIVEMQ_HOME%/bin/run.jar %ACTIVEMQ_TASK% %ACTIVEMQ_CMD_LINE_ARGS%
-
-
-goto end
-
-
-:end
-set LOCALCLASSPATH=
-set _JAVACMD=
-set ACTIVEMQ_CMD_LINE_ARGS=
-
-if "%OS%"=="Windows_NT" @endlocal
-
-:mainEnd
-if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
-
[EMAIL PROTECTED] off
+
+REM ActiveMQ shell script
+REM
+REM This script is heavily based on the Ant script
+REM
+REM Copyright 2005-2006 The Apache Software Foundation
+REM
+REM Licensed under the Apache License, Version 2.0 (the "License");
+REM you may not use this file except in compliance with the License.
+REM You may obtain a copy of the License at
+REM
+REM http://www.apache.org/licenses/LICENSE-2.0
+REM
+REM Unless required by applicable law or agreed to in writing, software
+REM distributed under the License is distributed on an "AS IS" BASIS,
+REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+REM See the License for the specific language governing permissions and
+REM limitations under the License.
+
+if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
+
+if "%OS%"=="Windows_NT" @setlocal
+
+rem %~dp0 is expanded pathname of the current script under NT
+set DEFAULT_ACTIVEMQ_HOME=%~dp0..
+
+if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
+set DEFAULT_ACTIVEMQ_HOME=
+
+rem Slurp the command line arguments. This loop allows for an unlimited number
+rem of arguments (up to the command line limit, anyway).
+set ACTIVEMQ_CMD_LINE_ARGS=%1
+if ""%1""=="""" goto doneStart
+shift
+:setupArgs
+if ""%1""=="""" goto doneStart
+set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
+shift
+goto setupArgs
+rem This label provides a place for the argument list loop to break out
+rem and for NT handling to skip to.
+
+:doneStart
+rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
+rem by the user or the %0 problem on Windows 9x
+if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
+
+rem check for activemq in Program Files on system drive
+if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
+set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
+goto checkJava
+
+:checkSystemDrive
+rem check for activemq in root directory of system drive
+if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
+set ACTIVEMQ_HOME=%SystemDrive%\activemq
+goto checkJava
+
+:checkCDrive
+rem check for activemq in C:\activemq for Win9X users
+if not exist C:\activemq\README.txt goto noAntHome
+set ACTIVEMQ_HOME=C:\activemq
+goto checkJava
+
+:noAntHome
+echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
+goto end
+
+:checkJava
+set _JAVACMD=%JAVACMD%
+set LOCALCLASSPATH=%CLASSPATH%
+
+set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
+
+if "%JAVA_HOME%" == "" goto noJavaHome
+if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
+goto runAnt
+
+:noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=java.exe
+echo.
+echo Warning: JAVA_HOME environment variable is not set.
+echo.
+
+:runAnt
+
+if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
+
+REM Uncomment to enable YourKit profiling
+REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
+
+REM Uncomment to enable remote debugging
+REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
+
+set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
+
+set ACTIVEMQ_TASK="query"
+"%_JAVACMD%" %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Djava.ext.dirs="%JAVA_EXT_DIRS%" -classpath "%LOCALCLASSPATH%" -jar
%ACTIVEMQ_HOME%/bin/run.jar %ACTIVEMQ_TASK% %ACTIVEMQ_CMD_LINE_ARGS%
+
+
+goto end
+
+
+:end
+set LOCALCLASSPATH=
+set _JAVACMD=
+set ACTIVEMQ_CMD_LINE_ARGS=
+
+if "%OS%"=="Windows_NT" @endlocal
+
+:mainEnd
+if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
+
Propchange: incubator/activemq/trunk/assembly/src/release/bin/query.bat
------------------------------------------------------------------------------
--- svn:eol-style (original)
+++ svn:eol-style Mon Mar 13 08:41:38 2006
@@ -1 +1 @@
-native
+CRLF
Propchange: incubator/activemq/trunk/assembly/src/release/bin/shutdown
------------------------------------------------------------------------------
svn:eol-style = LF
Modified: incubator/activemq/trunk/assembly/src/release/bin/shutdown.bat
URL:
http://svn.apache.org/viewcvs/incubator/activemq/trunk/assembly/src/release/bin/shutdown.bat?rev=385593&r1=385592&r2=385593&view=diff
==============================================================================
--- incubator/activemq/trunk/assembly/src/release/bin/shutdown.bat (original)
+++ incubator/activemq/trunk/assembly/src/release/bin/shutdown.bat Mon Mar 13
08:41:38 2006
@@ -1,115 +1,115 @@
[EMAIL PROTECTED] off
-
-REM ActiveMQ shell script
-REM
-REM This script is heavily based on the Ant script
-REM
-REM Copyright 2005-2006 The Apache Software Foundation
-REM
-REM Licensed under the Apache License, Version 2.0 (the "License");
-REM you may not use this file except in compliance with the License.
-REM You may obtain a copy of the License at
-REM
-REM http://www.apache.org/licenses/LICENSE-2.0
-REM
-REM Unless required by applicable law or agreed to in writing, software
-REM distributed under the License is distributed on an "AS IS" BASIS,
-REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-REM See the License for the specific language governing permissions and
-REM limitations under the License.
-
-if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
-
-if "%OS%"=="Windows_NT" @setlocal
-
-rem %~dp0 is expanded pathname of the current script under NT
-set DEFAULT_ACTIVEMQ_HOME=%~dp0..
-
-if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
-set DEFAULT_ACTIVEMQ_HOME=
-
-rem Slurp the command line arguments. This loop allows for an unlimited number
-rem of arguments (up to the command line limit, anyway).
-set ACTIVEMQ_CMD_LINE_ARGS=%1
-if ""%1""=="""" goto doneStart
-shift
-:setupArgs
-if ""%1""=="""" goto doneStart
-set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
-shift
-goto setupArgs
-rem This label provides a place for the argument list loop to break out
-rem and for NT handling to skip to.
-
-:doneStart
-rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
-rem by the user or the %0 problem on Windows 9x
-if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
-
-rem check for activemq in Program Files on system drive
-if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
-set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
-goto checkJava
-
-:checkSystemDrive
-rem check for activemq in root directory of system drive
-if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
-set ACTIVEMQ_HOME=%SystemDrive%\activemq
-goto checkJava
-
-:checkCDrive
-rem check for activemq in C:\activemq for Win9X users
-if not exist C:\activemq\README.txt goto noAntHome
-set ACTIVEMQ_HOME=C:\activemq
-goto checkJava
-
-:noAntHome
-echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
-goto end
-
-:checkJava
-set _JAVACMD=%JAVACMD%
-set LOCALCLASSPATH=%CLASSPATH%
-
-set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
-
-if "%JAVA_HOME%" == "" goto noJavaHome
-if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
-goto runAnt
-
-:noJavaHome
-if "%_JAVACMD%" == "" set _JAVACMD=java.exe
-echo.
-echo Warning: JAVA_HOME environment variable is not set.
-echo.
-
-:runAnt
-
-if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
-
-REM Uncomment to enable YourKit profiling
-REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
-
-REM Uncomment to enable remote debugging
-REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
-
-set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
-
-set ACTIVEMQ_TASK="stop"
-"%_JAVACMD%" %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Djava.ext.dirs="%JAVA_EXT_DIRS%" -classpath "%LOCALCLASSPATH%" -jar
%ACTIVEMQ_HOME%/bin/run.jar %ACTIVEMQ_TASK% %ACTIVEMQ_CMD_LINE_ARGS%
-
-
-goto end
-
-
-:end
-set LOCALCLASSPATH=
-set _JAVACMD=
-set ACTIVEMQ_CMD_LINE_ARGS=
-
-if "%OS%"=="Windows_NT" @endlocal
-
-:mainEnd
-if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
-
[EMAIL PROTECTED] off
+
+REM ActiveMQ shell script
+REM
+REM This script is heavily based on the Ant script
+REM
+REM Copyright 2005-2006 The Apache Software Foundation
+REM
+REM Licensed under the Apache License, Version 2.0 (the "License");
+REM you may not use this file except in compliance with the License.
+REM You may obtain a copy of the License at
+REM
+REM http://www.apache.org/licenses/LICENSE-2.0
+REM
+REM Unless required by applicable law or agreed to in writing, software
+REM distributed under the License is distributed on an "AS IS" BASIS,
+REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+REM See the License for the specific language governing permissions and
+REM limitations under the License.
+
+if exist "%HOME%\activemqrc_pre.bat" call "%HOME%\activemqrc_pre.bat"
+
+if "%OS%"=="Windows_NT" @setlocal
+
+rem %~dp0 is expanded pathname of the current script under NT
+set DEFAULT_ACTIVEMQ_HOME=%~dp0..
+
+if "%ACTIVEMQ_HOME%"=="" set ACTIVEMQ_HOME=%DEFAULT_ACTIVEMQ_HOME%
+set DEFAULT_ACTIVEMQ_HOME=
+
+rem Slurp the command line arguments. This loop allows for an unlimited number
+rem of arguments (up to the command line limit, anyway).
+set ACTIVEMQ_CMD_LINE_ARGS=%1
+if ""%1""=="""" goto doneStart
+shift
+:setupArgs
+if ""%1""=="""" goto doneStart
+set ACTIVEMQ_CMD_LINE_ARGS=%ACTIVEMQ_CMD_LINE_ARGS% %1
+shift
+goto setupArgs
+rem This label provides a place for the argument list loop to break out
+rem and for NT handling to skip to.
+
+:doneStart
+rem find ACTIVEMQ_HOME if it does not exist due to either an invalid value
passed
+rem by the user or the %0 problem on Windows 9x
+if exist "%ACTIVEMQ_HOME%\README.txt" goto checkJava
+
+rem check for activemq in Program Files on system drive
+if not exist "%SystemDrive%\Program Files\activemq" goto checkSystemDrive
+set ACTIVEMQ_HOME=%SystemDrive%\Program Files\activemq
+goto checkJava
+
+:checkSystemDrive
+rem check for activemq in root directory of system drive
+if not exist %SystemDrive%\activemq\README.txt goto checkCDrive
+set ACTIVEMQ_HOME=%SystemDrive%\activemq
+goto checkJava
+
+:checkCDrive
+rem check for activemq in C:\activemq for Win9X users
+if not exist C:\activemq\README.txt goto noAntHome
+set ACTIVEMQ_HOME=C:\activemq
+goto checkJava
+
+:noAntHome
+echo ACTIVEMQ_HOME is set incorrectly or activemq could not be located. Please
set ACTIVEMQ_HOME.
+goto end
+
+:checkJava
+set _JAVACMD=%JAVACMD%
+set LOCALCLASSPATH=%CLASSPATH%
+
+set
JAVA_EXT_DIRS=%JAVA_HOME%\lib\ext;%ACTIVEMQ_HOME%;%ACTIVEMQ_HOME%\lib;%ACTIVEMQ_HOME%\lib\optional
+
+if "%JAVA_HOME%" == "" goto noJavaHome
+if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
+goto runAnt
+
+:noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=java.exe
+echo.
+echo Warning: JAVA_HOME environment variable is not set.
+echo.
+
+:runAnt
+
+if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xmx512M
-Dderby.system.home="..\data" -Dderby.storage.fileSyncTransactionLog=true
+
+REM Uncomment to enable YourKit profiling
+REM SET ACTIVEMQ_DEBUG_OPTS="-Xrunyjpagent"
+
+REM Uncomment to enable remote debugging
+REM SET ACTIVEMQ_DEBUG_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
+
+set LOCALCLASSPATH=%ACTIVEMQ_HOME%\conf;%LOCALCLASSPATH%
+
+set ACTIVEMQ_TASK="stop"
+"%_JAVACMD%" %ACTIVEMQ_DEBUG_OPTS% %ACTIVEMQ_OPTS%
-Djava.ext.dirs="%JAVA_EXT_DIRS%" -classpath "%LOCALCLASSPATH%" -jar
%ACTIVEMQ_HOME%/bin/run.jar %ACTIVEMQ_TASK% %ACTIVEMQ_CMD_LINE_ARGS%
+
+
+goto end
+
+
+:end
+set LOCALCLASSPATH=
+set _JAVACMD=
+set ACTIVEMQ_CMD_LINE_ARGS=
+
+if "%OS%"=="Windows_NT" @endlocal
+
+:mainEnd
+if exist "%HOME%\activemqrc_post.bat" call "%HOME%\activemqrc_post.bat"
+
Propchange: incubator/activemq/trunk/assembly/src/release/bin/shutdown.bat
------------------------------------------------------------------------------
--- svn:eol-style (original)
+++ svn:eol-style Mon Mar 13 08:41:38 2006
@@ -1 +1 @@
-native
+CRLF
