From my old days as a surveyor and my newer days shooting for specials 
effects matching, here's how I'd do it.

Get a piece of 2x2 lumber and cut  into 12 inch lengths. Sharpen one 
end. This is a hub. They can be driven flush to the ground and aren't 
likely to shift.

At location, find your shot position and drive one of the "hubs" dead 
center between the tripod legs (if the ground is too hard to drive the 
hub, make a pilot hole with a piece of rebar or like metal pipe, etc.  
To be really precise, you can use a plumb bob to mark the hub center 
between the legs . Paint the hub with a bright flourescent paint so you 
can find it later and it protects the hub as well.

 With some reference points--a tree, a rock, road, etc-- pace or measure 
with a tape  a ground plan to the hub so you can find  the spot--I'd 
make at least three and draw a map. You can mark these in some 
environmentally kind way as well. Flagging, etc. Take pictures for 
reference and note road markers, etc.

Measure the camera height to center of lens, note the mm of lens and 
angle of camera in degree of tilt and compass heading.

When you come back to match, use a monitor to display a frame of the 
original shot and A B switch with the live shot until it matches.

I'm assuming there will be a dissolve to cover the season change, so 
you'll probably have a little room to work with..

Kent Hughes


> 
>
>
>
>
>  
>


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/ADr1lB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Adobe-Premiere/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to