Thanks Jeff. I'd wonder about some interlace incompatibility too, except the network has told me that the problem disappeared halfway through the tape.
I'm going to try another set of decks, and also try to out put directly to Beta and see what happens. Kent Jeff Schell wrote: >Don't know if this would affect it-- DV is usually lower field first (NTSC), >and beta SP is upper field first, if memory serves correct. Perhaps they are >describing interlace lines that have reversed field dominance? Maybe there's >less motion in the second half of the spot, so it's less noticeable? > >This is probably not the cause, though--if they're lines are only red and >running across the entire screen. Maybe there was a problem with the beta >tape at that point? > > >----- Original Message ----- >From: "Kent Hughes" <[EMAIL PROTECTED]> >To: <[email protected]> >Sent: Friday, December 09, 2005 8:48 AM >Subject: [AP] Beta SP Issue > > >Hey Gang > >I recently output a Premiere 1.5 project to DV tape then duped to Beta >SP for broadcast. I heard yesterday from the station that they were >seeing horizontal red lines throught the first 30 seconds of the 60 >second spot--then cleard up. > >Needless to say, I saw nothing on the master and no problems on the Beta >playback prior to shipping. > >Anybody seen anything like this? > >Thanks > >Kent Hughes > > > > >> >> > > > > >Yahoo! Groups Links > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > ------------------------ Yahoo! Groups Sponsor --------------------~--> Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life. http://us.click.yahoo.com/KIlPFB/vlQLAA/TtwFAA/ADr1lB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Adobe-Premiere/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
