Sune, As far as I know this should work. If you play an NTSC tape on any camera the signal which comes out of the Firewire socket should be NTSC and it should be possible to capture it on your Premiere system if it is set to NTSC. You could check that a signal is coming out of your Firewire socket by connecting it to another camera and checking that it is being received (displayed by the other camera). I suspect that you might need to check that your 'NTSC settings' are correct by comparing them with the settings used by an NTSC member of this list.
Presumably you will work on NTSC throughout and produce an NTSC DVD for this job? Julian Bristol, England *************** Date: Wed, 14 Dec 2005 16:19:37 +0100 From: Sune Alexandersen <[EMAIL PROTECTED]> Subject: Editing NTSC video! Hi group! Sorry for the kind of unclear subject line but I didn't know what to write.. A customer has given me some miniDV tapes that he would like me to transfer to DVD. The tapes are all NTSC (I don't think the customer was actually aware of this) so I am having difficulties capturing them into Premiere. I've selected the NTSC project settings at the start of program launch, but I cannot see anything in my capture video. I'm using a Sony handicam and the video plays back well on the camera itself.. Can the reason be that I have a PAL camera and allthough it supports playback of NTSC it doesn't allow transfer over firewire? Please help! ------------------------ Yahoo! Groups Sponsor --------------------~--> Most low income homes are not online. Make a difference this holiday season! http://us.click.yahoo.com/5UeCyC/BWHMAA/TtwFAA/ADr1lB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Adobe-Premiere/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
