Thanks Johsua and Kelly.
I selected each drive under Tape Drives in Device Manager and disabled.
(When I looked at the properties of these drives, they were using the NT
dlttape.sys driver.)
Works ok after 1 reboot anyways!
Thanks again - that was an annoying little problem!
Tim Rushforth
City of Winnipeg
[EMAIL PROTECTED]
-----Original Message-----
From: Joshua S. Bassi [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 16, 2000 12:09 PM
To: [EMAIL PROTECTED]
Subject: Re: DLT drive shows up as GENERICTAPE on TSM 3.7.3 on Windows
200 0
In W2K go into MMC and add the "Device Manager on local computer"
snap-in. Click on the icon and it should display all the devices
on the system. Find your drives and change "device usage:" to
disabled. You could get around it if you really know what you are
doing, but to make life easier I would just reboot.
--
Joshua S. Bassi
Senior Technical Consultant
Symatrix Technology, Inc.
[EMAIL PROTECTED]
