The odm definitions changed from 3.7.2 to 3.7.3 and above.
Instead of showing up as tape they are now defined adsmtape.
You should remove the old mtX definitions with the command
rmdev -dR mtX
Do this for each mtX device. Then redefine them through smitty.
Once you do you should see them from running the command
lsdev -Cc adsmtape
Regards,
James Thompson
>From: Shekhar Dhotre <[EMAIL PROTECTED]>
>Reply-To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: Upgrade
>Date: Fri, 17 Nov 2000 12:44:23 -0500
>
>Hi rebooted the AIX box , now rmt1 and rmt2 are available and mt0 and mt1
>defined ,
>how to make them available ? tried adding throgh smit -Tivoli storage
>manager
>-tape
>gives following error.
>
>Command: failed stdout: yes stderr: no
>
>Before command completion, additional instructions may appear below.
>
>Method error (/etc/methods/cfgadsmdd):
> 0514-047 Cannot access a device.
>cfgadsmdd[get_i]: ioctl SCIO(L)INQU first call failed, retry if possible,
>errno
>= 19
>cfgadsmdd[get_i]: SCIO(L)INQU failed w/ unretriable errno=19.
>cfgadsmdd[inq..]: free dds.
>cfgadsmdd[main ]: error inquiry or building dds,rc=47
>
>
>
>medrs2:lsdev -Cc tape
>lsdev: 0514-521 Cannot find information in the predefined device
> configuration database for the customized device mt0.
>lsdev: 0514-521 Cannot find information in the predefined device
> configuration database for the customized device mt1.
>rmt0 Available 10-60-00-5,0 SCSI 4mm Tape Drive
>mt0 Defined 20-60-00-3,0 N/A
>mt1 Defined 20-60-00-4,0 N/A
>rmt1 Available 20-60-00-3,0 Other SCSI Tape Drive
>rmt2 Available 20-60-00-4,0 Other SCSI Tape Drive
>
>
>
>
>"[EMAIL PROTECTED]/P=Internet/A= /C=us" on 11/17/2000
>11:50:29 AM
>Please respond to "[EMAIL PROTECTED]/P=Internet/A= /C=us" @
>X400
>To: "[EMAIL PROTECTED]/P=Internet/A= /C=us"@X400
>cc:
>
>Subject: Re: Upgrade
>
> I'm not sure if your cut and paste is truncating, but see mt0
>and mt1 it is not prefixed with 'r'....
> step 1). maybe rmdev -dl mt0 and rmdev -dl mt1
> followed by a cfgmgr
> may do it?
> I'll assume that the lsdev -Cc tape indicated device names of
>rmt0,
>mt0 and mt1....
> maybe go ahead and rmdev -dl rmt0 too on step 1....
> FYI Thanks Tim
>
>
>
>
> Shekhar Dhotre <[EMAIL PROTECTED]>
> 11/17/2000 10:37 AM
> Please respond to "ADSM: Dist Stor Manager"
><[EMAIL PROTECTED]>@SMTP@Exchange
> To: [EMAIL PROTECTED]@SMTP@Exchange
> cc:
>
> Subject: Re: Upgrade
>
> The problem is with rmt1 and rmt2 drives , they are not available
>to system
> (AIX) , but mt0 , and mt1 are ..
> So i amtrying to remove rmt1 and rmt2 , but unable to do so
>...
>notching my
> hairs ....
> medrs2:lsdev -Cc tape
> lsdev: 0514-521 Cannot find information in the predefined device
>
> configuration database for the customized device mt0.
>
> lsdev: 0514-521 Cannot find information in the predefined device
> configuration database for the customized device mt1.
>
>
> rmt0 Available 10-60-00-5,0 SCSI 4mm Tape Drive
> mt0 Available 20-60-00-3,0 N/A
> mt1 Available 20-60-00-4,0 N/A
> medrs2:rmdev -dl mt0
> rmdev: 0514-521 Cannot find information in the predefined device
> configuration database for the customized device mt0.
>
> medrs2:rmdev -dl mt1
> rmdev: 0514-521 Cannot find information in the predefined device
> configuration database for the customized device mt1.
>
> medrs2:odmdelete -q name=rmt1 -o CuAt
> 0518-307 odmdelete: 0 objects deleted.
>
> medrs2:set -o vi
>
> medrs2:odmdelete -q name=rmt1 -o CuDv
> 0518-307 odmdelete: 0 objects deleted.
> medrs2:odmdelete -q value3=rmt1 -o CuDvDr
> 0518-307 odmdelete: 0 objects deleted.
>
>
> medrs2:cfgmgr
> cfgmgr: 0514-612 Unable to configure the mt0 device because
> it either does not exist in the customized device database
>or it does no
> t
> have a corresponding entry in the predefined device
>database.
> cfgmgr: 0514-612 Unable to configure the mt1 device because
> it either does not exist in the customized device database
>or it does no
> t
> have a corresponding entry in the predefined device
>database.
>
> medrs2:id
> uid=0(root) gid=0(system)
>groups=2(bin),3(sys),7(security),8(cron),10(audit)
> medrs2:odmget CuAt | grep mt0
> name = "rmt0"
> name = "rmt0"
> name = "rmt0"
> name = "rmt0"
> name = "rmt0"
> name = "rmt0"
> name = "rmt0"
> name = "rmt0"
> name = "rmt0"
> name = "rmt0"
> name = "rmt0"
>
> medrs2:errpt
> IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
> 5DFED6F1 1116153600 I O SYSPFS UNABLE TO ALLOCATE SPACE
>IN
>FILE SYSTEM
> 369D049B 1112150900 I O SYSPFS UNABLE TO ALLOCATE SPACE
>IN
>FILE SYSTEM
>
>
>
> shekhar ..
>
>
>
>
>
>
>
> "[EMAIL PROTECTED]/P=Internet/A= /C=us" on
>11/17/2000
>10:04:44 AM
> Please respond to "[EMAIL PROTECTED]/P=Internet/A=
>/C=us" @ X400
> To: "[EMAIL PROTECTED]/P=Internet/A= /C=us"@X400
> cc:
>
> Subject: Re: Upgrade
>
> THose messages come from a communications problem somewhere
>between
>TSM,
> ssi, and ACSLS.
>
> * Make sure that ACSLS is up and you can talk with it via
>cmd_proc.
>
> * Then make sure that the ssi and mini-el tasks are up.
>Make
>sure
> they can talk with ACSLS by running lbtest.
>
> * If they are OK, then stop and restart TSM.
>
> * If you still get those errors, call support.
>
>
>
> > -----Original Message-----
> > From: Joshua S. Bassi [SMTP:[EMAIL PROTECTED]]
> > Sent: Thursday, November 16, 2000 5:39 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: Upgrade
> >
> >
> >
> > TSM server started but getting following error ..
> >
> > ANR0916I TIVOLI STORAGE MANAGER distributed by Tivoli is now
>ready
>for
> > use.
> > TSM:TSM>
> >
> > 11-16-00 17:14:32 none[0]:
> > cl_ipc_write: Sending message to socket 50004 failed on "Error
>0"
> > 11-16-00 17:14:52 none[0]:
> > cl_inform: Sending message to socket 50004 failed on "Error 0"
> > 11-16-00 17:15:02 none[0]:
> > acs_ipc_write: FATAL_ERROR! cl_ipc_write() failed.
> >
> >
> > 11-16-00 17:15:12 none[0]:
> > acs_ipc_write: FATAL_ERROR! cl_ipc_write() failed.
> >
> >
> >
> >
> >
> > "[EMAIL PROTECTED]/P=Internet/A= /C=us" on
>11/16/2000
> > 05:18:27 PM
> > Please respond to
>"[EMAIL PROTECTED]/P=Internet/A=
>/C=us" @
> > X400
> > To: "[EMAIL PROTECTED]/P=Internet/A= /C=us"@X400
> > cc:
> >
> > Subject: Re: Upgrade
> >
> > Issue# dsmserv upgradedb
> >
> >
> > --
> > Joshua S. Bassi
> > IBM Certified- AIX Support, HACMP, SAN
> > Enterprise Disk(Shark)& Tape Solutions
> > Tivoli Certified Consultant - ADSM/TSM
> > [EMAIL PROTECTED]
> >
> > -----Original Message-----
> > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On
>Behalf Of
> > Shekhar Dhotre
> > Sent: Thursday, November 16, 2000 2:00 PM
> > To: [EMAIL PROTECTED]
> > Subject: Upgrade
> >
> >
> > Hi all i just applied patch for Tivoli Storage manager .
> > to upgrade from 3.7.2 to 3.7.4 , and tried to restart the
>server
> > gives following error. where and how i should use UPGRADEDB
>command?
> >
> > # dsmserv
> > ANR7800I DSMSERV generated at 09:50:09 on Oct 17 2000.
> >
> > Tivoli Storage Manager for AIX-RS/6000
> > Version 3, Release 7, Level 4.0
> >
> > Licensed Materials - Property of IBM
> >
> > 5697-TSM (C) Copyright IBM Corporation 1999. All rights
>reserved.
> > U.S. Government Users Restricted Rights - Use, duplication or
>disclosure
> > restricted by GSA ADP Schedule Contract with IBM Corporation.
> >
> > ANR0900I Processing options file dsmserv.opt.
> > ANR0990I Server restart-recovery in progress.
> > ANR0200I Recovery log assigned capacity is 1100 megabytes.
> > ANR0201I Database assigned capacity is 500 megabytes.
> > ANR0306I Recovery log volume mount in progress.
> > ANR0983W The server database was recorded by a down-level
>version
>of the
> > server
> > program. The UPGRADEDB parameter is required to start the server
>and
> > automatically upgrade the database contents to the current
>server
>version.
> > Please refer to installation instructions for precautionary
>backup
> > procedures
> > prior to doing this.
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
