First off you should upgrade from the 3.7.0.0 GA code.
Secondly, to see if you have it set correctly, post the output
of ADSMDLIST.EXE FILENAME . This executable is located in the UTILS
directory where TSM is installed. You can also play around with LBTEST.EXE
in the same directory. LBTEST.EXE allows you to move tapes around in the
library.
James Thompson
>From: Geoff Pusey <[EMAIL PROTECTED]>
>Reply-To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Install problem with a 3502-108 DLT changer
>Date: Fri, 1 Dec 2000 14:57:59 +0000
>
>Hi,
>
>I hope some one can verify if I have installed and configured this drive
>correctly.
>
>I have a NT 4 with sp6 in a NT cluster environment. with "Storage
>Management Server for Windows NT - Version 3, Release 7, Level 0.0"
>
>tsm: NMRIOESRV01>q drive
>
>Library Name Drive Name Device Type Device ON LINE
>------------ ------------ ----------- ----------------
>-------------------
>LB0.0.0.3 MT1.0.0.3 DLT MT1.0.0.3 Yes
>
>
>
>
>**************************************************
>*** ---> Q VOLUME
>**************************************************
>
>
>Volume Name Storage
>Device Estimated Pct Volume
> Pool
>Name Class Name Capacity Util Status
> (MB)
>------------------------ ----------- ---------- ---------
>----- --------
>D:\ADSMDATA\DISK1.DSM BACKUPPOOL DISK 25.0
> 98.4 On-Line
>IOE1 DLTPOOL1
>DLTCLASS1 35,840.0 0.0 Filling
>
>
>The Library was set up as element = 16
>As all the 3502 drives linked me to this web site and as I only have one
>drive I thought it must be element 16. Is this right?
>
>
>
> IBM 3502-314
>
> Device
> SCSI ID
>
> Device Name
> Tape drive 1 (element 16)
>
>__________
>
> __________
> Tape drive 2 (element 17)
>
>__________
>
> __________
> Tape drive 3 (element 18)
>
>__________
>
> __________
> Robot
>
>__________
>
> __________
>
>
>
> Notes:
> 1.The following options should be
>set during configuration:
> Enable barcode
> Autoload cartridge - NO
> Auto Cleaning - NO (The
>cleaning cartridge must be in the last slot)
> Ramdom mode
>
>
>
>My problem is that when I do a backup and it migrates to the library I get
>the error no space left in volume? Is this a problem with the library or my
> config?
>
>I can read in new tapes and label them, but I am unable to copy any data to
>them.
>
>Any suggestions would be most appreciated
>
>Regards,
>
>Geoff Pusey
>Tivoli Advisory Consultant
>Tivoli Systems.
>Office : +44 (0)1753 896896
>Mobile : +44 (0) 780 8203704
>Email : [EMAIL PROTECTED]
_____________________________________________________________________________________
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
