Thank you very much for your help.
Indeed, the "Tape device" button finds the 2 3580 drives are tries
toload the 3580 drivers.
A Cancel is necessary to prevent him from loading the 3580 drives.
I went in the drivers tab and forced him to load the 3583 driver. I
rebooted and ... miracle, the 3580 drivers
are installed as well as the 3583 driver.
Thank you again,
Ruddy
-----Original Message-----
From: Vo An Nguyen/Quebec/IBM [mailto:[EMAIL PROTECTED]]
Sent: jeudi 28 d�cembre 2000 19:03
To: [EMAIL PROTECTED]
Subject: Re: LTO libraries under NT4.0
Hello Ruddy,
1- After installing the Ultrium device driver available from the ftp
site:
ftp://service.boulder.ibm.com/storage/devdrvr/WinNT/
2- You should go under Tape Devices and press ESC on the first panel.
3- Then select the Drivers tab and add your library.
4- Select the 3583 library and click on OK.
5- Press Yes to use the existing files.
You may need a reboot after step 1 and 5.
Regards,
Vo An Nguyen
Email: [EMAIL PROTECTED]
Ruddy STOUDER <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 12/28/2000
09:12:54
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: LTO libraries under NT4.0
I saw many mails concerning problems with LTO libraries under NT. I
> May be could you help me ? I have a 3583 library with 2 * 3580
> drives - They are all detected by the SCSI card but if I follow the
> documented procedure
> to install the drivers, I only see the drives under "Tape devices". Do
> you know why and how I should configure the Library.
>
>
> Many thanks in advance,
> Ruddy Stouder
> System Engineer
> I.R.I.S.
> Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
> B- 1435 Mont-Saint-Guibert
> [EMAIL PROTECTED]
> http://www.irislink.com
> Tel: +32 (0)10 48 75 10 - Fax: +32 (0)10 48 75 40
>
