Hi *SM-ers!
We are trying to install TSM 4.1.2 on Windows Nt SP 6.
The Server has a Qlogic card QLA2200F which is attached to SAN Data Gateway Router
2108/R03 scsi connected to a 3583 Ultrium library.
Windows NT is able to see the SDG and the library and the drives are detected. We are
able to use the single drive with NT Backup.
When we try to label or checkin a new tape using TSM Server we have the following
error message:
02/20/2001 16:31:06 ANR8300E I/O error on library LB0.1.0.3 (OP=8401C058,
CC=314, KEY=05, ASC=3B, ASCQ=0E,
SENSE=70.00.05.00.00.00.00.0A.00.00.00.00.3B.0E.E2.00.00-
.00., Description=The source slot or drive was empty in
an attempt to move a volume). Refer to Appendix D in the
'Messages' manual for recommended action.
02/20/2001 16:31:06 ANR9999D mmsscsi.c(10293): Could not move volume from slot
16 to slot 256.
02/20/2001 16:31:06 ANR8841I Remove volume from slot 16 of library LB0.1.0.3
at your convenience.
02/20/2001 16:31:06 ANR8832E CHECKIN LIBVOLUME for volumes in search mode in
library LB0.1.0.3 failed.
Someone know to solve this problem???
Regards
Rosy Specchia
