There is 1.08 firmware version. That seems to fix a bunch of problems.
Contact your library manufacturer about getting it.
Kelly J. Lipp
Storage Solutions Specialists, Inc.
PO Box 51313
Colorado Springs CO 80949-1313
(719) 531-5926
Fax: (240) 539-7175
Email: [EMAIL PROTECTED] or [EMAIL PROTECTED]
www.storsol.com
www.storserver.com
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Frost, Dave
Sent: Thursday, February 22, 2001 7:07 AM
To: [EMAIL PROTECTED]
Subject: ait2 firmware level
Hi *SMers,
we are running tsm version 3.7.4 on Solaris 7, and Sony ait2 tape drives in
an adic scalar 1000.
We are seeing a very large number reposition faults - especially with OP=RSR
- along with a scattering of actual read or write errors, spread across 10
drives and 500 tapes. In one particular case today, we have restored the
tape apparently giving a problem to the diskpool, and then refired the
restore. Before we had set off the restore, migration had moved the files
back to a new tape. Lo and behold, _exactly_ the same error occurred again
(different drive/different tape).
The error was (again)
ANR8302E I/O error on drive AIT09 (/dev/rmt/26mt) (OP=RSR, CC=205, KEY=FF,
ASC=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**, Description=SCSI adaptor failure).
The drives are paired, and are on 5 distinct chaparral routers.
The firmware level of the drives is x01e7.
TSM support can't find anything in particular.
Has anybody seen this before, or know what the recommendation is for this
combination?
tia
-=Dave=-
--
[EMAIL PROTECTED]
ACK and ye shall receive.
www.guardianit.com
The information contained in this email is confidential and intended only
for the use of the individual or entity named above. If the reader of this
message is not the intended recipient, you are hereby notified that any
dissemination, distribution, or copying of this communication is strictly
prohibited. Guardian iT Group will accept no responsibility or liability in
respect to this email other than to the addressee. If you have received
this communication in error, please notify us immediately via email:
[EMAIL PROTECTED]
