Hallo, Result from this and some offline responds: there seem not to be any limitation on BufPoolSize on *SM Server on NT starting with v 3.7, except for real free RAM size (practical limit) or except for free virtual memory size (theoretical limit). So all NT folks with small Cache Hit ratio go on and purchase RAM to increase your´s DB speed. thanks Juraj Salak, Linz, Austria -----Ursprüngliche Nachricht----- Von: Volovsek, Jay [mailto:[EMAIL PROTECTED]] Gesendet am: Donnerstag, 19. April 2001 17:23 An: [EMAIL PROTECTED] Betreff: Re: ? BUFPOOLSIZE limit under TSM4.1 / NT I am running my TSM box on W2K with a buffpool size of 196MB and it is running fine. That is the number that TSM chose on install. -----Original Message----- From: sal Salak Juraj [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 19, 2001 7:24 AM To: [EMAIL PROTECTED] Subject: Re: ? BUFPOOLSIZE limit under TSM4.1 / NT Hi and thanks, the very same sentence can be found in v3. manual, but there it is simply not true. Using larger values then 64 MB with 3.1.7 will cause *SM Server to start slow, slower, not to start at all (depending on the BufPoolSize value) and the space declared above 64MB will aparently never be used at all. Anyone running TSM 4.x on NT 4.x with Bufpoolsize > 64MB? Or at least on NT2000 - maybe BufPool works better there?? regards Juraj Salak -----Ursprüngliche Nachricht----- Von: Ray Pratts [mailto:[EMAIL PROTECTED]] Gesendet am: Donnerstag, 19. April 2001 14:01 An: [EMAIL PROTECTED] Betreff: Re: ? BUFPOOLSIZE limit under TSM4.1 / NT According to the 4.1 Admin. Reference, "The maximum value is limited by available virtual memory size." sal Salak Juraj wrote: hallo, I have purchased upgrade from TSM Server 3.1.7 under NT 4 to newest TSM server version. There is limitation of BufPoolSize to max. 65536 in my current system. I hope this limit is much larger with TSM 4.x - I would like to purchase some RAM an speed up my system. Can anyone tell me how large the limit is, if any? Another question: are there any late server versions I should avoid because of known problems? (NT4, DLT4, LTO) regards Salak Juraj KEBA AG Softwareentwicklung Bankautomation Gewerbepark Urfahr 14 - 16 Postfach 111 A-4041 Linz Österreich Tel. ++43/732/7090-7461 Fax ++43/732/730910 e-mail: [EMAIL PROTECTED] www.keba.co.at
