I use the following select statement in a server script for figuring out this
kind of information (was more useful in 5.5 and earlier when the REMARKS
field had nice descriptions for each field, too):
select colname from columns where tabname=upper('$1')
In this case:
tsm: SERVER>run tbl-desc volumes
...
COLNAME: READ_ERRORS
...
COLNAME: WRITE_ERRORS
...
As with the mount count, the error counts and many other values for a volume
are lost/reset when it returns to scratch.
=Dave
On 07/28/2016 10:42 AM, Lamb, Charles P. wrote:
> Would anyone know what the volume I/O error table labels are so the below
> script could be run on volume I/O errors??
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of Lee,
> Gary
> Sent: Thursday, July 28, 2016 10:21 AM
> To: [email protected]
> Subject: Re: [ADSM-L] Re: TSM script for the number of tape mounts per tape
> volume
>
> Yes, mount count resets to zero when it returns to scratch.
>
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of
> David Bronder
> Sent: Thursday, July 28, 2016 11:11 AM
> To: [email protected]
> Subject: Re: [ADSM-L] Re: TSM script for the number of tape mounts per tape
> volume
>
> Charles,
>
> Note that this number may not mean what you expect it to. The help for
> "query volume" notes that this value is the number of times the server opened
> the volume, which may be more than once per physical mount. Also, if you use
> scratch tapes, I'm pretty sure that the value gets discarded when the tape
> returns to the scratch pool and resets to zero when it's defined to a storage
> pool again.
>
> =Dave
>
>
> On 07/28/2016 08:45 AM, Koos Rietveld wrote:
>> select char(volume_name, 30) as VOLUME_NAME, times_mounted from
>> volumes where stgpool_name='VDP-DAT' order by times_mounted desc
>>
>>
>>
>> From: "Lamb, Charles P." <[email protected]>
>> To: [email protected]
>> Date: 28-07-2016 15:27
>> Subject: [ADSM-L] TSM script for the number of tape mounts per tape
>> volume
>> Sent by: "ADSM: Dist Stor Manager" <[email protected]>
>>
>> ----------------------------------------------------------------------
>> -------
>>
>>
>>
>> Hi...............
>>
>> Could someone share a TSM script for the number of tape mounts per
>> tape volume from highest to lowest?? Tnx's a bunch........
>>
>>
>
>
--
Hello World. David Bronder - Systems Architect
Segmentation Fault ITS-EI, Univ. of Iowa
Core dumped, disk trashed, quota filled, soda warm. [email protected]
