Robert, >09/05/2017 16:44:17 ANR0539W Transaction failed for session 20900 for > node IIP DM-LAB-FISH. This node has exceeded its maximum number of > mount points. (SESSION: 20900)
You stated that the default resource util is 2, you also stated that "maxnummp is 1" well, that's when you get this message. The client is trying to get two mountpounts but you are restricting it to one. The maxnummp must be the same or higher as the resource util, now you have it the other way around. Just lower the default value of 2 for the resource util to 1. On Thu, Sep 7, 2017 at 10:29 AM, Krzysztof Przygoda <[email protected]> wrote: > Hi Robert > Number of possible mount points you control from server. In your case it > will be: > update node your_nodename MAXNUMMP=1 > > Good luck and regards > Krzysztof > > 2017-09-07 9:36 GMT+02:00 [email protected] <[email protected] > >: > > > Hi Stefan > > > > First thanks for the input ..... > > > > O.K but how I avoid this message: > > > > 09/05/2017 16:44:17 ANR0539W Transaction failed for session 20900 > for > > > node IIP DM-LAB-FISH. This node has exceeded its maximum number of > > > mount points. (SESSION: 20900) > > > > Maybe the option in node : Keep Mount Point?: TO YES ( Now is NO) > > > > Regards > > > > Robert > > > > > > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of > > Stefan Folkerts > > Sent: Thursday, September 7, 2017 8:49 AM > > To: [email protected] > > Subject: Re: [ADSM-L] Mountpoints question > > > > It might seem pretty obvious but you need to set resourceutilization to 1 > > and not 3. > > Also, the amount of mountpoints doesn't equal the amount of tapes a > backup > > can use, it limits the amount of concurrent mountpoints a backup can use. > > > > > > > > On Thu, Sep 7, 2017 at 7:00 AM, [email protected] < > > [email protected]> wrote: > > > > > Hi to all > > > > > > Want to backup directly to LTO7 tapes and only in one tape till is > full. > > > > > > When my maxnummp is 1 for the node name got a lot of warning as: > > > > > > 09/05/2017 16:44:17 ANR0539W Transaction failed for session 20900 > > for > > > node IIP DM-LAB-FISH. This node has exceeded its maximum number of > > > mount points. (SESSION: 20900) > > > > > > I made some research and find this article: > > > http://www-01.ibm.com/support/docview.wss?uid=swg21584672 > > > > > > No resourceutilization option specified so default: 2 > > > > > > As the article said I increase the maxnummp to 3 , this night the > > > backup took 3 tapes !!!!! > > > > > > In my q node f=d I see: Keep Mount Point?: No > > > > > > Did I have to change it to YES , to backup to only one tape ? > > > > > > Any suggestions ??? > > > > > > Best Regards > > > > > > Robert > > > > > >
