Hi Stefan, First, check if the SESSIONSECURITY value is, in fact, the issue. Normally downlevel client nodes should be set to TRANSITIONAL. You can query the node (format=detailed) to get the current SESSIONSECURITY value, to see if it is set to STRICT.I would not expect a down-level client node that has never connected with an 8.1.2 client, to be set to STRICT. However, if all your nodes are are having problems, you should contact IBM support for further assistance, as a site-wide problem could be something more. Also have a look at this document, in case anything here is a fit for your scenario:
http://www.ibm.com/support/docview.wss?uid=swg22004844 Regards, Andy ____________________________________________________________________________ Andrew Raibeck | IBM Spectrum Protect Level 3 | [email protected] IBM Tivoli Storage Manager links: Product support: https://www.ibm.com/support/entry/portal/product/tivoli/tivoli_storage_manager Online documentation: http://www.ibm.com/support/knowledgecenter/SSGSG7/landing/welcome_ssgsg7.html Product Wiki: https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli%20Storage%20Manager "ADSM: Dist Stor Manager" <[email protected]> wrote on 2017-09-21 02:19:38: > From: Stefan Folkerts <[email protected]> > To: [email protected] > Date: 2017-09-21 02:20 > Subject: Re: ANS1357S after upgrade to V8.1.2 Server > Sent by: "ADSM: Dist Stor Manager" <[email protected]> > > Andrew, > > Just to be clear, because there is a bit of confusion here (and other > places) about the new security restrictions of the 8.1.2 release in regards > to older clients. > > When we upgrade a Spectrum Protect server to 8.1.2 and use a mix of older > and newer clients versions, the operations center and dsmadmc via new > and/or older versions and we run into issues with connecting with older > clients we can "update node" and set the SESSIONSECURITY to TRANSITIONAL > for those clients to allow older clients to still function on the newer > server without client upgrades? > > > > On Wed, Sep 20, 2017 at 6:46 PM, Andrew Raibeck <[email protected]> wrote: > > > Hi Bill, > > > > This document describes client/server compatibility: > > > > http://www.ibm.com/support/docview.wss?uid=swg21053218 > > > > In your case, is it possible that the node or admin had, at some time, > > authenticated using an 8.1.2 client? For affected nodes, check the > > SESSIONSECURITY setting, see if it is set to STRICT. If so, try setting > > back to TRANSITIONAL. > > > > https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.2/ > > srv.reference/r_cmd_node_update.html > > > > Regards, > > > > Andy > > > > ____________________________________________________________ > > ________________ > > > > Andrew Raibeck | IBM Spectrum Protect Level 3 | [email protected] > > > > IBM Tivoli Storage Manager links: > > Product support: > > https://www.ibm.com/support/entry/portal/product/tivoli/ > > tivoli_storage_manager > > > > Online documentation: > > http://www.ibm.com/support/knowledgecenter/SSGSG7/ > > landing/welcome_ssgsg7.html > > > > Product Wiki: > > https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli% > > 20Storage%20Manager > > > > "ADSM: Dist Stor Manager" <[email protected]> wrote on 2017-09-19 > > 15:54:59: > > > > > From: Bill Boyer <[email protected]> > > > To: [email protected] > > > Date: 2017-09-19 15:55 > > > Subject: ANS1357S after upgrade to V8.1.2 Server > > > Sent by: "ADSM: Dist Stor Manager" <[email protected]> > > > > > > After upgrading my (test) TSM server to V8.1.2 my clients are now getting > > > ANS1357S with back-level client version. Even a V7.1.2 client. Is there a > > > page that lists the client versions supported by V8.1.2 Server? We have > > some > > > older OS's that are running old client versions. Been trying to find a > > > compatibility matrix just for serve V8.1.2. > > > > > > > > > > > > Tia, > > > > > > > > > > > > Bill Boyer > > > "Enjoy life. It has an expiration date." - ?? > > > > > >
