Thank you, thats what I needed to know. Best Regards, John
> Gesendet: Donnerstag, 19. Oktober 2017 um 12:56 Uhr > Von: "Marc Lanteigne" <[email protected]> > An: [email protected] > Betreff: Re: [ADSM-L] TSM 6 to 7 Upgrade questions > > Just to clarify this statement: “Depending on old OS and new OS, you may want > to upgrade before or after the move.” > > > > You will want to move from v6 to v6, then upgrade to v7 > > Or upgrade to v7, and move from v7. > > > > I have seen cases where the new OS didn’t support v6, so they upgrade on the > old machine to v7 first, then migrate to a new machine running V7. Also seen > cases where the old OS didn’t support v7, so move from v6 to v6 on the new > machine, then upgrade to v7. > > > > Because the upgrade and the move are two separate tasks, they don’t need to > happen at the same time. The order will depend on the environment. > > > > - > > Thanks, > Marc... > > ________________________________________________________ > > Marc Lanteigne > > Accelerated Value Specialist for Spectrum Protect > > > > > > From: Marc Lanteigne [mailto:[email protected]] > Sent: Thursday, October 19, 2017 7:42 AM > To: ADSM: Dist Stor Manager <[email protected]> > Cc: ADSM-L <[email protected]> > Subject: Re: [ADSM-L] TSM 6 to 7 Upgrade questions > > > > Hi John, > > > > You are actually doing two separate tasks. Moving to a different machine and > upgrading the software. You have to do one before the other. Depending on > old OS and new OS, you may want to upgrade before or after the move. > > > > The actual move is very similar to a DR exercise. At a very high level: > > - install OS > > - install Soectrum Protect > > - restore DB > > - swing storage from old to new server > > > > Marc... > > > Sent from my iPhone using IBM Verse > > _____ > > On Oct 19, 2017, 7:19:13 AM, [email protected] <mailto:[email protected]> wrote: > > From: [email protected] <mailto:[email protected]> > To: [email protected] <mailto:[email protected]> > Cc: > Date: Oct 19, 2017, 7:19:13 AM > Subject: [ADSM-L] TSM 6 to 7 Upgrade questions > > Hello, > im planning to upgrade a clients TSM 6.3 server to TSM 7.1 on new hardware. > However the documentation I found > (https://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.3/srv.install/t_srv_upgrade63_71.html) > only provides a way to make an in-place upgrade. But I need to move to new > hardware. Is there a way to extract the database and import it on the new > system, like it was for TSM 5 to 6 upgrade? Can i use the v5 dsmupgrd > utilities to extract the TSM 6 database to Tape, and then TSM 7 dsmserv > insertdb to import the database again? > Best Regards, > John >
