For all you AIX guru's out there,
I need an additional information on the definition of 3590 FC tape drives to
AIX.
We want to use both FC ports of the 3590 drives (connected via a FC
fabric)in parallel for automatic path fail over. Is this supported by AIX
and how could this be implemented in AIX. At the moment I see for the same
drive two definitions in AIX. They are both available but they doesn't work
in TSM (drives are first polled by TSM and set to unavailable later on).
Do you have a recommendation for defining both pathes to AIX in parallel for
dynamic path fail over?
Thank you in advance
Uwe
-----Original Message-----
From: Steve Harris [mailto:[EMAIL PROTECTED]]
Sent: 02 May 2001 04:54
To: [EMAIL PROTECTED]
Subject: Quick 3590 question
Can anyone tell me how many fibre ports there are on a 3590 with the fibre
attachment?
Thanks
Steve Harris
AIX and ADSM Admin
Queensland Health, Brisbane Australia
Any e-mail message from the European Central Bank (ECB) is sent in good faith but
shall neither be binding nor construed as constituting a commitment by the ECB except
where provided for in a written agreement.
This e-mail is intended only for the use of the recipient(s) named above. Any
unauthorised disclosure, use or dissemination, either in whole or in part, is
prohibited.
If you have received this e-mail in error, please notify the sender immediately via
e-mail and delete this e-mail from your system.
