We still have a couple of HP 10.2 clients running 3.1.0.7 with a TSM 4.1.3
server on AIX. No problems.....
-----Original Message-----
From: Joshua S. Bassi [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, September 19, 2001 1:41 AM
To: [EMAIL PROTECTED]
Subject: Re: OLD Client Compatability with new TSM server
Dave, a gradual upgrade of the clients will work fine. I have done this
many times.
--
Joshua S. Bassi
Independent IT Consultant
IBM Certified - AIX/HACMP, SAN, Shark
Tivoli Certified Consultant- ADSM/TSM
Cell (408)&(831) 332-4006
[EMAIL PROTECTED]
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of
Dave Canan
Sent: Tuesday, September 18, 2001 5:30 PM
To: [EMAIL PROTECTED]
Subject: OLD Client Compatability with new TSM server
I have 2 customers that have finally gotten around to upgrading
their
servers from ADSM to TSM. The first customer is at ADSM for AIX V2, and
is
going to TSM for AIX V4.1 or V4.2. We are planning on upgrading all
clients
eventually to V4.x, but we need to find out if we have to do this
IMMEDIATELY or if we can just gradually upgrade them a few at a time.
Just
how compatible is a V2 client with a V4 server?
The second customer still has a few HP-UX V10.20 machines and is
installing 4.2. The last client that was written for HP-UX V10.20 was
ADSM
3.1.0.8. Will this ADSM client level work with an TSM 4.2 server?
I understand the support issue - this will not be a supported
configuration until all clients are at a supported level of TSM. I just
want to know if it will work or not until I can get all clients upgraded
to
a supported level.
Money is not the root of all evil - full backups are.
