Jack, Yes, they are assigned to the correct storage pool.
Phillip -----Original Message----- From: Jack Musselman [mailto:[EMAIL PROTECTED]] Sent: Saturday, October 27, 2001 8:25 PM To: [EMAIL PROTECTED] Subject: Re: empty and scratch tape question Hello, You are correct, TSM will use private tapes with an "EMPTY" status first, before using scratch tapes. Did you verify whether the defined "empty" tapes are assigned to the correct storage pool? Run a "q vol" on the tapes that you say are empty and verify their assigned storage pool. Hope this helps, Jackman -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Guan, Phillip Sent: Saturday, October 27, 2001 2:44 PM To: [EMAIL PROTECTED] Subject: empty and scratch tape question Hello, We have some empty tapes and some scratch tapes, we assume the TSM will use the empty tapes first ( within same storage pool ) before using scratch tapes. But the TSM uses the scratch tapes instead. These empty tapes are in 'READWRITE' stauts and the storage pool defination for the node has maxscratch defined, migdelay=0. Any idea why? AIX 4.3.3.0 TSM 4.1.2.0 3494 Library Best regards, Phillip Guan