And when you get that problem fixed, the element addresses for the drives are 63000 for the first drive, 63001 for the second and so on.
Kelly J. Lipp Storage Solutions Specialists, Inc. PO Box 51313 Colorado Springs, CO 80949 [EMAIL PROTECTED] or [EMAIL PROTECTED] www.storsol.com or www.storserver.com (719)531-5926 Fax: (240)539-7175 -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Seay, Paul Sent: Tuesday, November 27, 2001 4:14 PM To: [EMAIL PROTECTED] Subject: Re: Identifying library and tape drive devices in Solaris You have a SCSI bus problem most likely. Check for bent pins or missing terminators. The other possibility is a bad cable or the distance is too long because it is not ultra differential scsi or such. -----Original Message----- From: Ranganathan S [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 27, 2001 5:53 PM To: [EMAIL PROTECTED] Subject: Identifying library and tape drive devices in Solaris Hi, I am new to this list . If there is an FAQ please point me in that direction. We have a Qualstar 4440 library with Sony AIT2 Tape drives both are in the supported list for TSM. When I define the library with command define library qualstar libtype=scsi device=/dev/rmt/0lb the server just stops (or just waits there for a long time) Is there anybody who can give me a solution for this. Thanks in Advance, Ranga _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
