Look in "Using the Windows Backup-Archive Client" guide: "The tcpport option specifies a TCP/IP port address for a server. You can obtain this address from your administrator. " So putting a line 'tcpport 1501' in your dsm.opt file on NT server node will help. And for HTTP you will have to use http://your_tsm_server:1581/ instead of http://tsm:1580/.
The port numbers 1501 and 1581 are defaults values but are not open/used by default. Port 1501 is used on the client only if 'SCHEDmode PRompt' is used. And port 1581 is used only if Web Client Acceptor Daemon (dsmcad) service is started. So if they are not used there is no need to configure or change them. Zlatko Krastev IT Consultant Juergen Heinrich <[EMAIL PROTECTED]> on 28.11.2001 10:34:49 Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc: Subject: Antwort: Changing TCP and HTTP ports Hi Kien, the ports 1501 and 1581 are used as default ports for the TSM Client. If you are planning to change the server ports you have to also change the client ports. Sincerly Juergen Heinrich Verdi Information Consult GmbH Systemsmanagement Niederlassung Berlin Wittestra�e 30K D-13509 Berlin http://www.verdi-ag.com
