I have had some problems at 4.1.3 with reclaims of tapes recorded at low density hanging on reclaim after the move to high density. This may be fixed by later maintenance.
You may also like to change the way that you operate such as defining some volumes into pools rather than letting them take from scratch so that you force the data that you want on to high density/double length tapes and the older low density ones get used for off-site backups or dbbackups. Steve Harris TSM and AIX Admin Queensland Health, Brisname Australia >>> MUSTAFA BAYTAR <[EMAIL PROTECTED]> 21/01/2002 22:32:10 >>> Hello , Can i use both 3590 high performance and 3590 extended high performance cartridges in 3494 library with two 3590E1A and two 3590E1A extended tape drives. Any experience ? thanks ********************************************************************** This e-mail, including any attachments sent with it, is confidential and for the sole use of the intended recipient(s). This confidentiality is not waived or lost if you receive it and you are not the intended recipient(s), or if it is transmitted/ received in error. Any unauthorised use, alteration, disclosure, distribution or review of this e-mail is prohibited. It may be subject to a statutory duty of confidentiality if it relates to health service matters. If you are not the intended recipient(s), or if you have received this e-mail in error, you are asked to immediately notify the sender by telephone or by return e-mail. You should also delete this e-mail message and destroy any hard copies produced. **********************************************************************
