Hi all, on my testserver (AIX 4.3.3 / TSM 4.14 ) I tried to get the local DAT-drive as output-device for a test of unloaddb/loaddb going. Defined a 'manuel library' called 'LOC_DEV' Defined a 'manuel drive' called 'DAT1' pointing to '/dev/rmt0' with Library Name 'LOC_DEV' Defined a '4mm device class' called 'DAT' with 'recording format ' DDS3C', 'library name' = 'LOC_DEV'
Labelling a volume with 'label libvol LOC_DEV vol001' seems to work : ANR2017I Administrator ADMIN issued command: LABEL LIBVOLUME LOC_DEV vol001 OVERWRITE=YES ANR0984I Process 3 for LABEL LIBVOLUME started in the BACKGROUND at 14:24:40. ANR8799I LABEL LIBVOLUME: Operation for library LOC_DEV started as process 3. ANR8326I 002: Mount GENERICTAPE volume VOL001 R/W in drive DAT1 (/dev/rmt0) of library LOC_DEV within 60 minutes. ANR0609I LABEL LIBVOLUME started as process 3. ANR8372I 002: Remove GENERICTAPE volume VOL001 from drive DAT1 (/dev/rmt0) of library LOC_DEV. ANR8800I LABEL LIBVOLUME for volume VOL001 in library LOC_DEV completed successfully. ANR0985I Process 3 for LABEL LIBVOLUME running in the BACKGROUND completed with completion state SUCCESS at 14:27:38. Then I tried to make a dbbackup to the device class 'DAT', type 'FULL' on volume 'vol001' an d got the following error : ANR2280I Full database backup started as process 4. ANR4571E Database backup/restore terminated - insufficient number of mount points available for removable media. ANR0985I Process 4 for DATABASE BACKUP running in the FOREGROUND completed with completion state FAILURE at 14:28:57. My question : where do I have to set the number of mountpoints other then in the the '4mm device class' or do I have enywhere else a wrong definition ? Thanks for help Chris
