Switch on perform tracing on the client. This will break down where the time is being spent, so you can identify your bottleneck I was seeing circa 3 mb. sec restoring a netware client from 9840 across a network With a directly attached tape and an AIX client you ought to get better. John
John Bremer <[EMAIL PROTECTED]> on 02/07/2002 11:07:01 PM Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc: (bcc: John Naylor/HAV/SSE) Subject: restoring backupsets *SMers, We're trying to restore a backupset from 9840 media. Our tape drive is attached to an AIX client and we are seeing only 1-2 MB/sec data transfer rates. Is there a reason why we don't see tape and/or disk speeds on this restore? The disk should run at 14-15 MB/sec and the SCSI 9840 at 10 MB/sec. THanks. John Bremer ********************************************************************** The information in this E-Mail is confidential and may be legally privileged. It may not represent the views of Scottish and Southern Energy plc. It is intended solely for the addressees. Access to this E-Mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. Any unauthorised recipient should advise the sender immediately of the error in transmission. Scottish Hydro-Electric, Southern Electric, SWALEC and S+S are trading names of the Scottish and Southern Energy Group. **********************************************************************
