When I had a similar error we finally traced it to incorrectly defined drives. Tivoli will accept some definitions even if they are incorrect. Make sure the elements are not transposed. If your defining SCSI drives, make sure that the drives and rmts are not transposed. If it's a SCSI card, make sure it's a supported SCSI card. 4B cards don't supported with LTO drives.
Doug Ruska 904-791-8099 -----Original Message----- From: Diego N Fabani [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 19, 2002 4:48 PM To: [EMAIL PROTECTED] Subject: Labeling dlt tape on 7337 library I'm working with TSM 4.2 running on AIX 4.3.3. I defined the Library, drives and devclass with the element number 116 and 117 succesfully. But when i try to label a volume, i receive the following error. ANR8779E Unable to open drive /dev/mt2, error number=46. ANR8302E I/O error on drive DRIVE02 (/dev/mt2) (OP=OFFL, Error Number=46, CC=203, KEY=02, ASC=04, ASCQ=02, SENSE=70.00.02.00.00.00.00.16.00.00.00.00.04.02.00.00.00.00.86.00.5B.00.00.1 3. 16.00.00.00.00., Do you know where is the problem? Thank you very much, Diego. Saludos/Regards, Diego. Diego Nicol�s Fabani Distributed Services E-mail : [EMAIL PROTECTED] Tel. #: 54-11-4319-7063. Tie Line #: 840-7063 CTSI Martinez. IBM Argentina S.A.
