but the tape DB_DO dont get mounted.. and the tape should be big enough for
the db.

i use a DLT4000 drive with an dlt IV tape.. should hold 20GB uncomp. or 40GB
comp.


the database and log size:

adsm> q log

Available     Assigned       Maximum       Maximum        Page         Total
Used       Pct      Max.
    Space     Capacity     Extension     Reduction        Size        Usable
Pages      Util       Pct
     (MB)         (MB)          (MB)          (MB)     (bytes)         Pages
Util
---------     --------     ---------     ---------     -------     ---------
     ---------     -----     -----
    5,000        5,000             0         4,996       4,096     1,279,488
212       0.0      11.1

adsm> q db

Available     Assigned       Maximum       Maximum        Page         Total
Used       Pct      Max.
    Space     Capacity     Extension     Reduction        Size        Usable
Pages      Util       Pct
     (MB)         (MB)          (MB)          (MB)     (bytes)         Pages
Util
---------     --------     ---------     ---------     -------     ---------
     ---------     -----     -----
   20,000       20,000             0        19,532       4,096     5,120,000
122,359       2.4       2.4

adsm>


a db backup to a scratch volume (with the same size) works.



-----Ursprungliche Nachricht-----
Von: Thomas Denier [mailto:[EMAIL PROTECTED]]
Gesendet: Donnerstag, 28. Februar 2002 15:23
An: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Betreff: ANR4583E Database backup terminated


> i wanna backup the database every monday and thuesday on a tape (DB_MO)
for
> monday and (DB_DO) for thuesday.
>
> the command "BACKUP DB DEV=DLTCLS02 T=F VOL=DB_DO SCR=N WAIT=NO" for
> thuesday is a Admin Command Schedule.
> the strange thing is that i always get the following error.. also when i
> start it directly in the console.
>
> adsm> backup db dev=dltcls02 type=full vol=db_do scr=no wait=yes
> ANR0984I Process 81 for DATABASE BACKUP started in the FOREGROUND at
> 11:29:35.
> ANR2280I Full database backup started as process 81.
> ANR4583E Database backup terminated - output media full and scratch media
> could not be mounted.
> ANR0985I Process 81 for DATABASE BACKUP running in the FOREGROUND
completed
> with completion state FAILURE at 11:30:40.
> ANS8001I Return code 8.
>
> adsm>
>
> the tape DB_DO is empty and located in the library.. also there is a empty
> scratch tape in this lib.
> and the loader is OK.

I don't see any mystery here. The backup fails when volume DB_DO fills up.
The presence of an empty scratch tape is irrelevant because the "scr=n"
option explicitly forbids the backup to use scratch tapes.

Reply via email to