Hi, I will try the following steps to configure the IBM 3583-L18 (2 drives LVD) library attached to Intel server (Windows 2000 server SP2) via SCSI. The HBA (Host Bus Adapter) is the Adaptec 29160LP LVD.
Any review is very welcome. 1) I install the IBMUltrium.Win2k.exe downloaded from IBM web-site. The latest version of the drivers is 5.0.2.4. I install the these drivers for the charger and the drives. I think it�s mandatory to install the IBMUltrium driver for the charger. In the step number 8, I tell TSM to use the TSM device driver for the charger!! 2) I disable the RSM 3) I test the library via NTUtil tool. I can find this tool in the installation directory created by IBMUltrium.Win2k.exe 4) I install the TSM server 5) I install the TSM licenses 6) I install the TSM backup/archive client 7) I install the TSM device driver 8) Via MMC (Microsoft Management Console) I tell TSM to use the IBMUltrium Drivers for the drives and to use the TSM device drivers for the drives 9) Only now I can: define library ... libtype=scsi device=lb1.2.3.4 ..... define drive ... device=\\.\tape0 etc. etc. Thank you vary much for your kind attention. Regards Paolo Nasca Cleis Technology srl � Italy [EMAIL PROTECTED] [EMAIL PROTECTED]
