Actually I just tried something. If I changed the command "issue message i" to "issue message e" in my script files and now the message is put into the event log so my network monitor picks it up using SNMP.
Thanks for the reply. Joe -----Original Message----- From: Prather, Wanda [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 12, 2002 4:45 PM To: [EMAIL PROTECTED] Subject: Re: Sending certain messages in the actlog to be displayed in the NT Eventlog Well, the admin ref manual says you can do it with: ENABLE EVENTS NTEVENTLOG ANR1596 (note you leave the I off ANR1596I). I've never done ENABLE with the EVENTLOG, just with SNMP (and on AIX, at that). So I don't know if there is stuff you have to do in Windows. ANyway, check out the commands ENABLE EVENTS, BEGIN EVENTLOGGING and END EVENTLOGGING in the Admin ref, that's where you start. ************************************************************************ Wanda Prather The Johns Hopkins Applied Physics Lab 443-778-8769 [EMAIL PROTECTED] "Intelligence has much less practical application than you'd think" - Scott Adams/Dilbert ************************************************************************ -----Original Message----- From: Joe Cascanette [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 12, 2002 1:59 PM To: [EMAIL PROTECTED] Subject: FW: Sending certain messages in the actlog to be displayed in the NT Eventlog > -----Original Message----- > From: Joe Cascanette > Sent: Tuesday, March 12, 2002 1:54 PM > To: Adsm (E-mail) > Subject: Sending certain messages in the actlog to be displayed in the NT Eventlog > > Can I send messages from the actlog to the NT event log?. I have some ANR1496I messages that I put have put into the actlog (from my macros) and would like these messages to be put into the event log so my network watch can pick these up and email me. > > > Joe
