HI All, TSM Server 4.2.1.8 on AIX 433_06 with 3494/3590E1A
I just received 180 tapes (At Last!) and went to label the first 20. When I ran label libv with checkin, 11 out of the 20 failed to label. I reran these several times and eventually all but 1 labeled correctly; the second last took three attempts, I gave up on the last one after three attempts plus an attempt to write other data to it using tapeutil failed. These are Imation 3590K carts. Can I expect this sort of drama for the whole 180? Secondly, During the second attempt at labelling I used label libv search=y volr=blah00,blah19 checkin=pri devt=3590 The first two tapes were labelled ok, the third one was also labelled ok and put away by the robot but the label libv process hung at that point. I had to halt and restart TSM to continue. Has anyone else seen this on a late version of TSM? I know something similar was around in 4.1... Regards Steve Harris AIX and TSM Admin Queensland Health, Brisbane Australia ********************************************************************** This e-mail, including any attachments sent with it, is confidential and for the sole use of the intended recipient(s). This confidentiality is not waived or lost if you receive it and you are not the intended recipient(s), or if it is transmitted/ received in error. Any unauthorised use, alteration, disclosure, distribution or review of this e-mail is prohibited. It may be subject to a statutory duty of confidentiality if it relates to health service matters. If you are not the intended recipient(s), or if you have received this e-mail in error, you are asked to immediately notify the sender by telephone or by return e-mail. You should also delete this e-mail message and destroy any hard copies produced. **********************************************************************
