If some of the files on the volume span volumes those other volumes will be needed also in order to move data.
Alan Davenport Senior Storage Administrator Selective Insurance [EMAIL PROTECTED] (973) 948-1306 -----Original Message----- From: Jim Coen [mailto:[EMAIL PROTECTED]] Sent: Wednesday, March 20, 2002 12:30 PM To: [EMAIL PROTECTED] Subject: ADSM sees 'readwrite' as 'offsite' ADSM Smart People, AIX: 4.3.2 ADSM: 3.1.2.1 (I know it's old, but we are upgrading!) ====================================================== I have an ongoing problem that I haven't found the solution to in the ADSM archives. I will bring a volume onsite, will set that volume acc=readw (from 'offsite'). So far, so good. However, when I attempt to move data from that volume to another, ADSM continues to see it as 'offsite' (even though if I do: 'q vo acc=readw', the volume will show up in the list AND if I do: 'q vo acc=offsite', the volume will NOT show up in that list). Consequently, in order to do a 'move data', multiple tape mounts are usually required (from the primary pool)--sometimes as many as 30 or more tapes to empty the data from one volume!. This happens to about 1/3 of the volumes I bring onsite. Obviously, it gets very painful after a while, and I would love to know if there is a workaround for this little 'problem'. Thanks. Jim Jim Coen [EMAIL PROTECTED] Manager, Application Software Services ADSM Administrator Listserv Administrator/News Administrator ================================ <>< ================================ Information Technology Services Washburn University 785-231-1010 Ext 2304 Topeka, KS 66621 Wisdom has two parts: 1) Having a lot to say 2) Not saying it
