I think u update to scratch and checkout with force=yes option and try.
-----Original Message-----
From: Burak Demircan [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 02, 2002 7:40 AM
To: [EMAIL PROTECTED]
Subject: Re: Volume Problem
try audit vol command with fix=yes option then upgrade your TSM server
to avoid further problems
[EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
02.04.2002 16:07
Please respond to ADSM-L
� � � �
� � � � To: � � � �[EMAIL PROTECTED]
� � � � cc: � � � �
� � � � Subject: � � � �Volume Problem
Hi!
I am running reclamation for a copy pool and there are two tapes in the
pool that have reclaimed all of the data except for the last 1%.
Reclamation runs and pulls these volumes in about every hour(I don't have
reclamation jobs set to run at certain times).
04/01/2002 00:56:46 � ANR1040I Space reclamation started for volume 491674,
� � � � � � � � � � � �storage pool TAPECOPYSPMGNT (process number 12).
04/01/2002 00:56:46 � ANR1040I Space reclamation started for volume 483401,
� � � � � � � � � � � �storage pool TAPECOPYSPMGNT (process number 12).
04/01/2002 01:31:38 � ANR1040I Space reclamation started for volume 491674,
� � � � � � � � � � � �storage pool TAPECOPYSPMGNT (process number 16).
04/01/2002 01:31:38 � ANR1040I Space reclamation started for volume 483401,
� � � � � � � � � � � �storage pool TAPECOPYSPMGNT (process number 16).
04/01/2002 01:32:46 � ANR1040I Space reclamation started for volume 491674,
� � � � � � � � � � � �storage pool TAPECOPYSPMGNT (process number 17).
04/01/2002 01:32:46 � ANR1040I Space reclamation started for volume 483401,
� � � � � � � � � � � �storage pool TAPECOPYSPMGNT (process number 17).
04/01/2002 01:56:46 � ANR1040I Space reclamation started for volume 491674,
� � � � � � � � � � � �storage pool TAPECOPYSPMGNT (process number 18).
04/01/2002 01:56:46 � ANR1040I Space reclamation started for volume 483401,
� � � � � � � � � � � �storage pool TAPECOPYSPMGNT (process number 18).
I brought the tapes back from the vault and tried to do a MOVE DATA, but
when I try this I get the message: �ANR2209W Volume 483401 contains no
data.
When I do a q vol I get the following:
Volume Name � � � � � � � Storage � � �Device � � �Estimated � �Pct
Volume
� � � � � � � � � � � � �Pool Name � �Class Name � Capacity � Util
Status
� � � � � � � � � � � � � � � � � � � � � � � � � � � �(MB)
------------------------ �----------- �---------- �--------- �-----
--------
483401 � � � � � � � � � �TAPECOPYS- � TAPEOFF3- � �11,427.6 � �1.0 � �Full
� � � � � � � � � � � � � �PMGNT � � � �590
Which leads me to believe that there is information on the tape. �I have
even also tried to delete the information off of the tape and that doesn't
work either. �I don't know what else to do to get these tapes to scratch.
Any suggestions?? �Thanks!!!
Joni Moyer
Associate Systems Programmer
[EMAIL PROTECTED]
(717)975-8338
