Hi, using of large disk stg pools minimises tape unload/load cycles which is important in such situation
if you can afford two tape drives (you do can configure one tsm manual library consisting from more tape drives as opposite to impossibility of definig one tsm library consisting of more (hw) tape libraries) then you have no problems at all if you have one tape drive only then some workarounds for tape2tape operations are necessary generally speaking - it works like a breeze, I had it with v3.1 2 years ago and am about to configure newest version this way soon regards juraj Salak [EMAIL PROTECTED] -----Original Message----- From: Kolbeinn Josepsson [mailto:[EMAIL PROTECTED]] Sent: Monday, April 22, 2002 3:51 PM To: [EMAIL PROTECTED] Subject: Single Drive Manual Library Hi all there, Does anyone have experience using TSM with Single Drive Manual Library for small sites? I think it is rather complicated to get those configuration to work without problems, I have not found any recommendations or samples in Red Books or Tivoli Manuals. If anyone have found out a good working configuration for Single Drive Manual Library installation, and like to share it with others, then kindly reply with short description of how to do... Also any suggestions are welcome. Thanks and regards, Kolbeinn Josepsson NYHERJI HF. BORGARTUN 37 IS-105 REYKJAVIK ICELAND
