Yes, it works the same way unless you have open zoning. Paul D. Seay, Jr. Technical Specialist Naptheon, INC 757-688-8180
-----Original Message----- From: Fought,Tom [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 04, 2002 10:50 AM To: [EMAIL PROTECTED] Subject: Re: Multiple HBA Configuration on AIX/TSM We are doing something similar here... our FC drives are connected through a McData switch. The tape drives have to be "zoned" before they can be seen... any thing like that with the Brocade Switch? -----Original Message----- From: Kenneth T Hymes [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 04, 2002 10:18 AM To: [EMAIL PROTECTED] Subject: Multiple HBA Configuration on AIX/TSM New install of TSM 5.1, running on AIX 4.3.3. We have four HBA's Emulex LP9002l's, two configured to CLARRion storage for Database, Recovery Log and Disk Storage Pool. The other two HBA's are going to a Brocade switch's where there are 8 9940 STK Fiber drives. We cannot see/configure the tape drives. We swapped out the LP90002's to LP7000's and still have not been able to see the tape drives. Is anyone running a similar environment that can help with the configuration of the HBA's ? We are using the CLARiion drivers for the CLARiion storage and have tried the IBM and Emulex drivers for the Tape HBA's. Ken Hymes [EMAIL PROTECTED]
