All you have to do is issue an update libvolume [lib] [volume] status=scratch. If it is not in use TSM will change it to scratch.
Paul D. Seay, Jr. Technical Specialist Naptheon, INC 757-688-8180 -----Original Message----- From: Joel Fuhrman [mailto:[EMAIL PROTECTED]] Sent: Wednesday, June 05, 2002 8:53 PM To: [EMAIL PROTECTED] Subject: Re: q libv showed 'private' STATUS but blank LAST_USE Check the tape out and then back in with a status=scratch. On Wed, 5 Jun 2002, Chuck Lam wrote: > TSM 4.1.4 running in AIX 4.3.3 > > After I came back from the Memorial weekend, I noticed > a bunch of tapes with 'private' Status but blank > Last_Use when I did a 'q libv'. 'q vol volume_name' > on these tapes returned with 'NO MATCH'. There were > problems with one of the tape drives over that weekend > and a lot of tapes were marked as 'UNAVAILABLE' by > TSM, but I was able to make them work again by > modifying the access=readwrite. However, I cannot > even 'q volume' this bunch of tapes, since TSM seemed > to lose track of them. > > Can anyone help me with this problem? > > TIA > > > > __________________________________________________ > Do You Yahoo!? > Yahoo! - Official partner of 2002 FIFA World Cup > http://fifaworldcup.yahoo.com >
