Do you have some form of shell access to the TSM server? Then you could use the ntutil/tapeutil command to manually load the tape back into the drive.
/Hans -----Original Message----- From: Justin Bleistein [mailto:[EMAIL PROTECTED]] Sent: 11 June 2002 21:04 To: [EMAIL PROTECTED] Subject: manual drive question!!! When I'm using manual drives and I label a tape it spits the tape out each time when it's done labelling, this sucks because I'm not a the location of where the hardware is. It's annoying calling someone all the time just to pop the tape back in. Does anyone know of a parameter which keeps the tape in the drive even after a successfully TSM tape label operation? Any help would be appreciated thanks! --Justin Richard Bleistein *********************************************************** Confidentiality Notice The content of this e-mail is intended only for the confidential use of the person(s) to whom it is addressed. If the reader of this message is not such a person, you are hereby notified that you have received this communication in error and that reading it, copying it, or in any way disseminating its content to any other person, is strictly prohibited. If you have received this message is error, please notify the author by replying to his e-mail immediately. ===========================================================
