That is all you have to do. Once it is in the library again, TSM will know where to mount it from. Are you aware of the AUDIT Library command.
Generally, a tape gets in this state if it is mounted in a drive and the TSM Server task crashes. The reason is TSM does not know where the tape is anymore. I wish it did not work this way on the 3494 library though because the 3494 library just puts the tape away and still knows where it is. Paul D. Seay, Jr. Technical Specialist Naptheon, INC 757-688-8180 -----Original Message----- From: Ruksana Siddiqui [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 11, 2002 11:37 PM To: [EMAIL PROTECTED] Subject: what happens to the data Hi all, TSM has marked one of my tape which has VIMP data on it as unavailable and I managed to make its access READONLY. q libv is not picking the vol - and I can see ( physically ) that the tape is in the library - On the panel of the library the tape is referred as something else and I believe the barcode is stuffed. I checked the tape out of the library manually and sure now that is the tape I want. Now can I check this tape in as private and see if it recognizes it - ? what else can I do - I can't efford to lose the data on the tape. with regards, CAUTION - This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify AMCOR immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of AMCOR.
