Is your re-use delay making games with you? I have seen this in 4.1 but dissapeard in a later 4.1.x fix release.
Have you tried an audit on the volumes? Maybe this wil fix your problem. I will upgrade a customer NSM machine to 4.2.2.4, I let you know if I see the same problems or not. good luck Peter At 12:39 14-06-2002 -0700, Kelly J. Lipp wrote: >TSM V4.2.2.4 on Win2K. I have a bunch of volumes that are empty, in the >library, readwrite, etc. A q media command shows them as mountable in >library. However, if I try to delete these volumes I get a "no thanks" >volume in mountablenotinlibrary state. A perusal of the past suggests a >move media volname stg=stgname wherestate=mountalbeno will do it, but that >returns a no volume in that state. > >Obviously something is whacked. Ideas? > >Thanks, > >Kelly J. Lipp >Storage Solutions Specialists, Inc. >PO Box 51313 >Colorado Springs, CO 80949 >[EMAIL PROTECTED] or [EMAIL PROTECTED] >www.storsol.com or www.storserver.com >(719)531-5926 >Fax: (240)539-7175 met vriendelijke groet, with regards, Peter Pijpelink ---------- Bezoek onze website op http://www.plcs.nl P.L.C.S. BV Storage Consultants is certified TSM ---------- Postadres: Bezoekadres: PLCS B.V. PLCS B.V. Postbus 292 Het Tasveld 23 3340 AG Hendrik Ido Ambacht 3342 GT Hendrik Ido Ambacht Tel.: 078-6823685 Fax: 078-6823686 mobiel 06-24821621 Op deze email is een disclaimer van toepassing. http://www.plcs.nl/disclaimer.html On this email is subject to a disclamier. http://www.plcs.nl/disclaimer.html ----------
