I did not HAVE to do the audit - mine was consistent. I only started it in case we have to do it when I do production. I wanted to see how long it would take. It's possible I then did the loaddb again, I don't remember right now. I did the unload/load a couple of times with various combinations of disk, which made little difference in the time.
Andy Carlson |\ _,,,---,,_ Senior Technical Specialist ZZZzz /,`.-'`' -. ;-;;,_ BJC Health Care |,4- ) )-,_. ,\ ( `'-' St. Louis, Missouri '---''(_/--' `-'\_) Cat Pics: http://andyc.dyndns.org/animal.html On Tue, 18 Jun 2002, Ramnarayan, Sean A [EDS] wrote: > Hi Andy > > How did you manage to start your server if you cancelled the Audit process. > > Thks > Sean > > -----Original Message----- > From: Andrew Carlson [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, June 18, 2002 3:25 PM > To: [EMAIL PROTECTED] > Subject: Re: DSMSERV DUMPDB , LOADDB and AUDITDB > > > I did this on a test server, with a full production database. The > unload took 16 hours, the load took 7 hours. I started the audit, and > it appeared that it would run 92 hours!!!!. I did not let it finish, so > I do not know how long it would have actually run. > > > Andy Carlson |\ _,,,---,,_ > Senior Technical Specialist ZZZzz /,`.-'`' -. ;-;;,_ > BJC Health Care |,4- ) )-,_. ,\ ( `'-' > St. Louis, Missouri '---''(_/--' `-'\_) > Cat Pics: http://andyc.dyndns.org/animal.html > > > On Tue, 18 Jun 2002, Ramnarayan, Sean A [EDS] wrote: > > > Hi > > > > I need to do a DUMPDB , LOADDB and AUDITDB of our TSM database. > > I have currently done the DUMPDB and LOADDB and this process took about 13 Hours >to complete. > > > > Total db before DUMPDB : 23 GB > > Total db after Dumpdb and Loaddb : 12 GB > > > > After the Loaddb was completed it requesting to have an AUDITDB done before >bringing up the > > TSM server. > > > > I would like to know how long it would take to do AUDITDB with a fix=yes and >detail=no after the database has > > been reduced by nearly half the size ? > > > > Has anyone done this before or is there another way of doing the above as our >database is in an inconsistent state? > > > > We are running our TSM server on AIX 4.3.3 and the server is attached to the SP >(WinterHawk2 Wide Node). > > The storage is attached to the Shark. > > > > > > Thks > > > > Sean Ramnarayan > > TSM/UNIX Administrator > > EDS ( South Africa) > > > > > > > > > > > > "MMS <caltex.com>" made the following > > annotations on 06/18/2002 11:29:09 AM > > ------------------------------------------------------------------------------ > > DISCLAIMER > > This message may contain confidential information that is legally privileged and >is intended only for the use of the parties to whom it is addressed. If you are not >an intended recipient, you are hereby notified that any disclosure, copying, >distribution or use of any information in this message is strictly prohibited. If you >have received this message in error, please notify the sender immediately and delete >the message. Thank you. > > > > ============================================================================== > > > > > "MMS <caltex.com>" made the following > annotations on 06/18/2002 04:59:56 PM > ------------------------------------------------------------------------------ > DISCLAIMER > This message may contain confidential information that is legally privileged and is >intended only for the use of the parties to whom it is addressed. If you are not an >intended recipient, you are hereby notified that any disclosure, copying, >distribution or use of any information in this message is strictly prohibited. If you >have received this message in error, please notify the sender immediately and delete >the message. Thank you. > > ============================================================================== >
