I assume this is on Solaris.. To use the TSM device driver, you will have to configure the library in lb.conf. The library device name would then be /dev/rmt/xlb.
Hunny Kershaw Internet Address: [EMAIL PROTECTED] Tivoli Storage Manager - Device Driver Development Tel (408) 256-2828, T/L 276-2828 Quality Policy = "Commit to Quality, Customer Satisfaction, Continual Improvement" "Lie, Jorgen" <Jorgen.Lie@STORAGENE To: [EMAIL PROTECTED] TWORKS.COM> cc: Sent by: "ADSM: Dist Subject: I/O error with an ATL P1000 library Stor Manager" <[EMAIL PROTECTED] > 07/08/2002 03:43 PM Please respond to "ADSM: Dist Stor Manager" All, Trying to define an ATL P1000 library but I am getting the following error: tsm: SERVER1>define library atl3000 libtype=scsi device=/dev/rmt/0cbn ANR8418E DEFINE LIBRARY: An I/O error occurred while accessing library ATL3000. ANS8001I Return code 3. Below are the entries in the st.conf file: fsgsolsrv3# cat st.conf | grep -v "\#" tape-config-list= "QUANTUM DLT7000", "Quantum DLT7000", "DLT7k-data", "Quantum DLT4000", "Quantum DLT4000", "DLT-data"; DLT-data = 1,0x38,0,0xD639,4,0x80,0x81,0x82,0x83,2; DLT7k-data = 1,0x38,0,0x1D639,4,0x82,0x83,0x84,0x85,3; name="st" class="scsi" target=0 lun=0; name="st" class="scsi" target=0 lun=1; name="st" class="scsi" target=0 lun=2; name="st" class="scsi" target=0 lun=3; name="st" class="scsi" target=0 lun=4; Any ideas ? I am new to TSM so keep it basic ! :) Thanks, Jorgen Lie