Not sure what is going on. But do you use audit to check in tapes? That will not work. What you should do is do a checkin vol search=library stat=scr (use the web interface). Audit library is for mismatch only, it doesn't check in volumes.
-----Oorspronkelijk bericht----- Van: Cahill, Ricky [mailto:[EMAIL PROTECTED]] Verzonden: maandag 15 juli 2002 14:52 Aan: [EMAIL PROTECTED] Onderwerp: Overland Neo Library Audit In house we use two Storagetek L180's, I'm currently working on our DR and for this we'll be using an Overland neo (stack of 6) I can get TSM to see and work with the Overland Neo, and if I load tapes manually into it the cartridge map shows up the barcode labels fine. What I can't do is bulk load the library up and do a library audit, or get any information back from the library as to what tapes are loaded into what drives. Does anyone use an Overland Neo and can tell me what I need to change to get it to send audit info back to TSM. TSM version is 4.2.1 Thanks in advance ..........Rikk > iTNET > Rikk Cahill > 3rd Line Server Support > [EMAIL PROTECTED] > Equitas London 0207-342-2358 > > **************************************************************************** ************************ Equitas Limited, 33 St Mary Axe, London EC3A 8LL, UK NOTICE: This message is intended only for use by the named addressee and may contain privileged and/or confidential information. If you are not the named addressee you should not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify [EMAIL PROTECTED] and delete the message and any attachments accompanying it immediately. Equitas reserve the right to monitor and/or record emails, (including the contents thereof) sent and received via its network for any lawful business purpose to the extent permitted by applicable law Registered in England: Registered no. 3173352 Registered address above **************************************************************************** ************************
