I restored one 220kb Excel file this weekend from a backupset with approx 270,000 files from a W2K client at 4.2.2.0 with a server at W2K, TSM 4.2.2.2. with an IBM 3584.
One 220kb file, it took 92 hours. Does anyone know what math formula is used to determine the amount of time that this should take, no one at Tivoli could tell me. Mark Bertrand -----Original Message----- From: Garrison, Tony [mailto:[EMAIL PROTECTED]] Sent: Monday, July 22, 2002 10:55 AM To: [EMAIL PROTECTED] Subject: Re: General TSM Q's what kind of problem did you have with the backupset? we recovered 2 Aix 4.3.3 filespaces with backupsets this weekend. The filespaces have approx 3.5 million files and was taking about 40hrs per filespace to perform a normal restore. the problem is running node collocation, it really stretched our restore time to an unacceptable length of time. we were able to recover both filespaces with backup sets in approx 30 hrs each. this includes the time required to perform a replace if newer restore to get any changes since the backupset was created. Consequently we restored the server in less then 40 hrs from start to finish. Anyone else have experience running backupsets that might be able to help us cut this time even more? T Tony Garrison I/T Sr. Systems Programmer USAA 210-913-9836 -----Original Message----- From: Cardoza, George [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 16, 2002 11:52 AM To: [EMAIL PROTECTED] Subject: Re: General TSM Q's I'll bite... let me throw in my two cents worth: 1. A 30GB TSM database is considered large. We have a 30Gb TSM database with 250 server nodes containing 70TB of data on an IBM 3584 Tape Library. We have a 5GB log file and process approximately a TB a day in daily changes. This is all under the AIX platform, I think it is technically possible to do it with NT, but the stability and recovery times may be larger than the AIX platform. (Our configuration: 2-way, Silvernode, 2GB memory, SP Switch, 100TX, TSM V. 4.2.2, Fiber attached library/tape drives. 2. An undersized library usually means you have a lot of "media waits" while the tape drives fight for contention and available scratch tapes, or slots. This usually shows itself immediately with reclamation, migration, data moves, etc. If you can't run your scheduled reclamation and still make your backup window for your scheduled jobs, then you probably need more tape drives or a larger library. Check your policies and retention periods. As is true with all TSM installations, your mileage may vary. 3. We just did a disaster/recovery test at a remote site this past weekend and here is at what we experienced. The incremental backups worked fine, the archive backup worked fine, the backupset did not. We used the archive tape and rolled forward to point-in-time restore to our disaster recovery point. We used Sysback/6000 to recovery the AIX servers with great results... I highly recommend it. 4. We are going to a second TSM server on AIX to start backing up key NT workstations. We have 9,000 seats but will probably only backup a small percentage of IT, Finance, and administrative workstations. We have an old DLT tape library which we are redeploying for workstation use. You might want to consider the same thing with your old tape library as you consider your purchase of a new one. 5. Mixed library media on a TSM server is supported. It should work just fine. We are running DLT and LTO tape libraries on a single AIX server for the past year. No problem. Although TSM Server supports both NT and AIX platforms, and I have worked with both, I have found AIX to be quicker to recover from and more reliable of the two. (No, I am not getting paid money from IBM or Microsoft for my endorsement. Just one man's opinion ...) George Cardoza Perot Systems 310.423.1670 - Office -----Original Message----- From: Miller Dave (RBNA/CIT1) [mailto:[EMAIL PROTECTED]] Sent: Monday, July 15, 2002 1:51 PM To: [EMAIL PROTECTED] Subject: General TSM Q's Hello All, We have recently deployed TSM at our site. Being new to TSM, I have a few questions I was hoping someone may be able to help with. I am running TSM 4.2.1.9 with a Compaq ESL9198DLX on W2K 1) Our TSM database has grown surprisingly fast. We tend to backup LOTS of little tiny files and as a result our Database is currently around 30Gb. I understand that the technical limit for the DB is somewhere around 5TB. Should I be concerned running a 30GB database on NT using a single server? Would this be considered a small, average or large TSM installation? 2) We've also found that our library is a little under-sized. (I regularly find myself exporting tapes from our primary tape storage pool to make room for scratch media). I would like to replace two or three of the DLT40/80 drives in the library with SDLT units. The ESL9198 hardware will support Mixing DLT and SDLT drives and media. Does any know or have experience setting up a library with two media types? Would TSM support this type of environment? Any help or information anyone can provide would be greatly appreciated! Dave Miller [EMAIL PROTECTED]
