Might want to double check the manual... States that if you want to use multiple paths to the same server, and have manual password you need to
1) not have a "NODE blah" in your dsm.sys SErver entries... 2) use a different node name for each different path to the server... So say you have server_a and server_b (the two paths to "server") then you will want to have your nodes be "node PV1" and "node PV1_B" and will need both of those registered... or maybe PV1_A & PV1_B Dwight E. Cook Software Application Engineer III Science Applications International Corporation 509 S. Boston Ave. Suite 220 Tulsa, Oklahoma 74103-4606 Office (918) 732-7109 -----Original Message----- From: Tait, Joel [mailto:[EMAIL PROTECTED]] Sent: Tuesday, August 20, 2002 7:37 AM To: [EMAIL PROTECTED] Subject: Re: Parallel Backup Paths for TDP R/3 Hi, I reduced my maxsessions to from 16 to 8 and reduced sessions per backup path from 8 to 4 sessions and receive the following: Tivoli Data Protection for R/3 Interface between SAPDBA Utilities and Tivoli Storage Manager - Version 3, Release 2, Level 0.4 for WinNT - Build: 138O compiled on Aug 1 2001 (c) Copyright IBM Corporation, 1996, 2001, All Rights Reserved. BKI0005I: Start of backint program at: 08/20/02 08:21:55 . BKI1214E: TSM Error: '!S!' BKI1203E: Not enough sessions available (7 required and 4 available). BR233E Backup utility has reported an error while saving file J:\ORACLE\PV1\SAPDATA3\PROTI_1\PROTI.DATA1 BR233E Backup utility has reported an error while saving file G:\oracle\PV1\sapbackup\cntrl.dbf The second backup path is not connecting. We are using this for performance and we are going to a disk pool and migrating to tape. Is there a limitation with disk storage pools as a posed to Tape storage pools? Thanks JET -----Original Message----- From: Raghu Srinivas [mailto:[EMAIL PROTECTED]] Sent: August 20, 2002 5:17 AM To: [EMAIL PROTECTED] Subject: Re: Parallel Backup Paths for TDP R/3 Hi Joel TDP for R/3 is working properly with the existing configuration in your "initPV1.utl" file. You can check by issuing "q sess" while backup are in progress.You can only find 7 sessions of production backup. If you want to use the second adapter card for performance improvement do the following changes in "e:\oracle\PV1\817\database\initPV1.utl" file ( I assumed 8 drives are there in your library ). MAX_SESSIONS 8 SERVER server_a # Servername SESSIONS 4 # Max sessions PASSWORDREQUIRED YES # Use a password ADSMNODE PV1 BRBACKUPMGTCLASS DB # Mgmt-Classes BRARCHIVEMGTCLASS LOG # Mgmt-Classes SERVER server_b # Servername SESSIONS 4 # Max sessions PASSWORDREQUIRED YES # Use a password ADSMNODE PV1 # Tivoli Storage Manager Nodename BRBACKUPMGTCLASS DB # Mgmt-Classes BRARCHIVEMGTCLASS LOG # Mgmt-Classes in this case both the adaptercards will be used. If you want to use the second adapter card for disaster recovery( second card as spare) do the following changes in "e:\oracle\PV1\817\database\initPV1.utl" file ( I assumed 8 drives are there in your library ). MAX_SESSIONS 8 SERVER server_a # Servername SESSIONS 8 # Max sessions PASSWORDREQUIRED YES # Use a password ADSMNODE PV1 BRBACKUPMGTCLASS DB # Mgmt-Classes BRARCHIVEMGTCLASS LOG # Mgmt-Classes SERVER server_b # Servername SESSIONS 8 # Max sessions PASSWORDREQUIRED YES # Use a password ADSMNODE PV1 # Tivoli Storage Manager Nodename BRBACKUPMGTCLASS DB # Mgmt-Classes BRARCHIVEMGTCLASS LOG # Mgmt-Classes in this case only first adapter card will be used.If the first card is down, the second card will be used. Hope this information is useful to you Regards Raghu S Nivas Consultant - TSM DCM Data Systems Ltd New Delhi India. "Tait, Joel" <Joel.Tait@CCRA-A To: [EMAIL PROTECTED] DRC.GC.CA> cc: Sent by: "ADSM: Subject: Parallel Backup Paths for TDP R/3 Dist Stor Manager" <[EMAIL PROTECTED] .EDU> 08/20/2002 01:44 AM Please respond to "ADSM: Dist Stor Manager" Hi, When I try to use Parallel backup paths for TDP R/3, I receive the following error message when trying to connect to the same TSM server on two different Network Adapters: Tivoli Data Protection for R/3 Interface between SAPDBA Utilities and Tivoli Storage Manager - Version 3, Release 2, Level 0.4 for WinNT - Build: 138O compiled on Aug 1 2001 (c) Copyright IBM Corporation, 1996, 2001, All Rights Reserved. BKI0005I: Start of backint program at: 08/19/02 15:01:16 . BKI1214E: TSM Error: '!S!' -- Parameters -- Input File : G:\oracle\PV1\sapbackup\.bdirmimw.lst Output File : Profile : e:\oracle\PV1\817\database\initPV1.utl Configfile : E:\oracle\PV1\817\database\initPV1.bki Manual sorting file : disabled Tracefile : disabled Traceflags : disabled Parallel sessions : 7 Multiplexed files : 1 RL compression : 1 TCPWait : 1 Retries to TSM : 3 Retries for files : 3 Exit on error : disabled BATCH : enabled Buffer size : 32768 Redologcopies : disabled Versioning : enabled Current Version : 17 Backup Type : file SNMPTRAP : disabled TSM log server : disabled TSM server : SERVER_A with 8 sessions configured, using 7 session TSM client node : TSM server version : 4.2.1.7 TSM server ip : 10.10.10.1 TSM server name : SD07X661.N TSM server type : Windows NT Sign-in id name : PV1 Compression : client determined Archive deletion : allowed Days for backup : Sun Mon Tue Wed Thu Fri Sat Backup mgmt class : DB Archiv mgmt class : LOG TSM server : [SERVER_B] My initSID.utl #************************************************************************** # Statement for multiple Servers and multiple Paths. # may be used multiple times (one for each server). #************************************************************************** SERVER server_a # Servername SESSIONS 8 # Max sessions PASSWORDREQUIRED YES # Use a password ADSMNODE PV1 BRBACKUPMGTCLASS DB # Mgmt-Classes BRARCHIVEMGTCLASS LOG # Mgmt-Classes SERVER server_b # Servername SESSIONS 8 # Max sessions PASSWORDREQUIRED YES # Use a password ADSMNODE PV1 # Tivoli Storage Manager Nodename BRBACKUPMGTCLASS DB # Mgmt-Classes BRARCHIVEMGTCLASS LOG # Mgmt-Classes Server_a connects fine, Server_b does not connect. My server_a.opt COMMmethod TCPIP SLOWINCR NO COMPression OFF NODEname PV1 TCPPort 1500 TCPServeraddress 10.10.10.1 PASSWORDACCESS PROMPT LARGECOMMBUFFER NO TCPBUFFSIZE 31 TCPWINDOWSIZE 2048 My server_b.opt COMMmethod TCPIP SLOWINCR NO COMPression OFF NODEname PV1 TCPPort 1500 TCPServeraddress 10.10.10.101 PASSWORDACCESS PROMPT LARGECOMMBUFFER NO TCPBUFFSIZE 31 TCPWINDOWSIZE 2048 Environment TSM Server 4.2.1.7 2 Giganet Lan adapters Win2K TSM 4.2.X TDP R/3 3.2.0.4 2 Giganet Lan adapters Win2K Thanks JET ----- Message from "Tait, Joel" <[EMAIL PROTECTED]> on Mon, 1 Nov 1999 09:17:46 -0400 ----- Subject: Joel Tait
