I called support, they said piping to a file generates more detailed messages and I would be able to see what was going on. It would be nice if they recommended that you pipe the output to a file in the documentation in case there are problems.
Paul D. Seay, Jr. Technical Specialist Naptheon Inc. 757-688-8180 -----Original Message----- From: Andrew Carlson [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 04, 2002 7:13 AM To: [EMAIL PROTECTED] Subject: Re: UNLOADDB Appears Stuck and Will not Continue Paul, I had the same thing occur. I was unloadding to disk, so I was able to see that the file was still growing, so I let it run. Andy Carlson |\ _,,,---,,_ Senior Technical Specialist ZZZzz /,`.-'`' -. ;-;;,_ BJC Health Care |,4- ) )-,_. ,\ ( `'-' St. Louis, Missouri '---''(_/--' `-'\_) Cat Pics: http://andyc.dyndns.org/animal.html On Sun, 1 Sep 2002, Seay, Paul wrote: > Has anyone experience the UNLOADDB to seem to stall for many hours and > stop putting out the UNLOAD messages? > > It was running great 1.5M entries per message (about every 10 > seconds). Then just stopped after about 3 hours at 523942500. > > Is it running an audit because something is amiss? > > Paul D. Seay, Jr. > Technical Specialist > Naptheon Inc. > 757-688-8180 >
