Hi, I believe I have an answer for question 3. But, USE WITH CAUTION - I have not really tried it myself, but when I have done an upgrade from v.3.7 to 4.x or 5.x, I've used a cmd called tsmfixup.cmd. In that file you can find the commands for initializing a server, with a short description of the commands. I recommend you take a look at this file, and test it on a non-critical server.
rgds Geirr G. Halvorsen -----Original Message----- From: Rosa Leung [mailto:[EMAIL PROTECTED]] Sent: 16. september 2002 20:19 To: [EMAIL PROTECTED] Subject: TSM 5.1.0.0 installation questions Hi, I am trying to install TSM 5.1.0.0 to about 6-9 NT and Win2000 servers for a client, Each server has single tape device, there is no ATL, I have done about 5, and I run into few problems, they are 1. during the TSM server configuration, just before TSM server initialization, I often got FM - code error pop out screen. 2. the above error, does not really will stop the TSM server initialization, but there were 2 servers that have DB2 running, got time out during the TSM server initialization. 3. If I do not using the wizard to initialize TSM server, what are the manual steps I can initialize the server, does this document any Doc.? 4. I have done de-installed once, does this de-install corrupt registry? Thanks. Rosa Leung
