Hi, Some notes:
- Diskpool has as nexstg Diskpool2 (should be Filpool1); - Diskpool2 has no volumes defined in it (est. cap=0) and has no next stg (should be Filpool2?). Seems that you have to define volumes in diskpool2 and/or define a next stg. Gr. -----Oorspronkelijk bericht----- Van: murali ramaswamy [mailto:[EMAIL PROTECTED]] Verzonden: dinsdag 26 november 2002 17:28 Aan: [EMAIL PROTECTED] Onderwerp: Re: Please help - ANS1311E Server out of data storage space in TSM Hi, q stg gives output as shown at bottom. But still I get error while backing up (by automatic schedule) as below: Date/Time: 11/26/2002 10:03:15 Message: ANR0522W Transaction failed for session 9 for node MURALI (WinNT) - no space available in storage pool BACKUPPOOL and all successor pools. Please help for a fix! thanks -murali ANS8000I Server command: 'q stg' Storage Pool Name: ARCHIVEPOOL Device Class Name: DISK Estimated Capacity (MB): 0.0 Pct Util: 0.0 Pct Migr: 0.0 High Mig Pct: 90 Low Mig Pct: 70 Next Storage Pool: DISKPOOL2 Storage Pool Name: BACKUPPOOL Device Class Name: DISK Estimated Capacity (MB): 0.0 Pct Util: 0.0 Pct Migr: 0.0 High Mig Pct: 90 Low Mig Pct: 70 Next Storage Pool: DISKPOOL2 Storage Pool Name: DISKPOOL Device Class Name: DISK Estimated Capacity (MB): 4.0 Pct Util: 0.1 Pct Migr: 0.0 High Mig Pct: 90 Low Mig Pct: 70 Next Storage Pool: DISKPOOL2 Storage Pool Name: DISKPOOL2 Device Class Name: DISK Estimated Capacity (MB): 0.0 Pct Util: 0.0 Pct Migr: 0.0 High Mig Pct: 90 Low Mig Pct: 70 Next Storage Pool: Storage Pool Name: FILPOOL1 Device Class Name: FILEDEV1 Estimated Capacity (MB): 0.0 Pct Util: 0.0 Pct Migr: 0.0 High Mig Pct: 90 Low Mig Pct: 70 Next Storage Pool: Storage Pool Name: FILPOOL2 Device Class Name: FILEDEV2 Estimated Capacity (MB): 0.0 Pct Util: 0.0 Pct Migr: 0.0 High Mig Pct: 90 Low Mig Pct: 70 more... (<ENTER> to continue, 'C' to cancel) Next Storage Pool: Storage Pool Name: SPACEMGPOOL Device Class Name: DISK Estimated Capacity (MB): 0.0 Pct Util: 0.0 Pct Migr: 0.0 High Mig Pct: 90 Low Mig Pct: 70 Next Storage Pool: ANS8002I Highest return code was 0. >From: Joel Fuhrman <[EMAIL PROTECTED]> >Reply-To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: Please help - ANS1311E Server out of data storage space in TSM >Date: Tue, 19 Nov 2002 17:36:21 -0800 > >I had this once. I had plenty of scratch tapes, the disk pool was not full, >we do not use caching so there was no reason for the error. I bounced the >server and the error went away. > >On Tue, 19 Nov 2002, Sias Dealy wrote: > > > Murali, > > > > Sorry, I am reading too much into your e-mail. > > > > I just want to be clear on this. > > We have a TSM client that is backing up to a TSM server. > > The backup is failing due to the ANS message about the server > > out of storage space. > > > > Is the data going to a storage pool that is on the disk and > > then migrated to a tape library? > > > > On the TSM server and issue q stg, is there a storage pool that > > have a %Uil of 100? And if so, is this the disk pool or a tape > > pool? > > > > Sias > > > > > > ---- On Tue, 19 Nov 2002, murali ramaswamy > > ([EMAIL PROTECTED]) wrote: > > > > > Hi, > > > I am not doing server-server communication. I have server > > and client on my > > > machine and a client on another machine in network that I > > want to backup. > > > Thanks > > > - murali > > > > > > > > > > > > > > > > > > > > > >From: Sias Dealy <[EMAIL PROTECTED]> > > > >Reply-To: [EMAIL PROTECTED] > > > >To: [EMAIL PROTECTED] > > > >Subject: Re: Please help - ANS1311E Server out of data > > storage space in TSM > > > >Date: Tue, 19 Nov 2002 18:28:23 -0500 > > > > > > > >Murali, > > > > > > > >Are you doing server to server communication? > > > >If this is the case, the target server may not have enough > > > >space. > > > > > > > >Lower the migration threshold and check the actlog. There > > > >should be some message about the migration failing and there > > > >should also be our famous ANS1311E message. > > > > > > > >I know that you can add a volume to the target server. The > > > >command escapes me at the moment. I just don't do server to > > > >server communcation as often as I would like. > > > > > > > >Sias > > > > > > > > > > > > > > > > > > > >________________________________________________ > > > >Get your own "800" number > > > >Voicemail, fax, email, and a lot more > > > >http://www.ureach.com/reg/tag > > > > > > > > > > > >---- On , murali ramaswamy ([EMAIL PROTECTED]) > > wrote: > > > > > > > > > Hi, > > > > > I am not mapping a drive. I added the IP address in the > > > >field while > > > > > creating the NODE for the other machine. > > > > > Thanks > > > > > -murali > > > > > > > > > > > > > > > > > > > > > > > > > >From: Sias Dealy <[EMAIL PROTECTED]> > > > > > >Reply-To: <[EMAIL PROTECTED]> > > > > > >To: "murali ramaswamy" <[EMAIL PROTECTED]>, ADSM- > > > >[EMAIL PROTECTED] > > > > > >Subject: Re: Re: Please help - ANS1311E Server out of > > data > > > >storage space in > > > > > >TSM > > > > > >Date: Tue, 19 Nov 2002 17:38:05 -0500 > > > > > > > > > > > > > > > > > >Murali, > > > > > > > > > > > >If the data from the disk pool is not going to a tape > > pool > > > >but > > > > > >the data is going to another machine. > > > > > >I would check the network connection and also if that > > machine > > > > > >is up and running. If both checks out fine, then chech > > to see > > > > > >if there is enough space on the target machine. > > > > > > > > > > > >Are you mapping a drive to another machine? I would > > unmap and > > > > > >remap the drive. On Windows 2000 drive mapping is not as > > > > > >forgiving as NTFS on Unix. > > > > > > > > > > > >If everything checks fine. > > > > > >Lower the migration threshold and check the actlog to see > > > >what > > > > > >kind of error message that you are getting. > > > > > > > > > > > >A volume is just a file where TSM stores data. I'm not > > too > > > >sure > > > > > >if this would be consider a flat file or not. > > > > > > > > > > > > > > > > > >Sias > > > > > > > > > > > >---- On Tue, 19 Nov 2002, murali ramaswamy > > > > > >([EMAIL PROTECTED]) wrote: > > > > > > > > > > > > > Hi, > > > > > > > What is volume on Windows 2000 box? I dont have any > > > >backup > > > > > >tape drive > > > > > > > attached. I just back up to another location on the > > > >machine > > > > > >which was > > > > > > > created through the Device Configuration wizard on the > > > >Server > > > > > >GUI. > > > > > > > Thanks > > > > > > > -murali > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >From: Sias Dealy <[EMAIL PROTECTED]> > > > > > > > >Reply-To: [EMAIL PROTECTED] > > > > > > > >To: [EMAIL PROTECTED] > > > > > > > >Subject: Re: Please help - ANS1311E Server out of > > data > > > > > >storage space in TSM > > > > > > > >Date: Tue, 19 Nov 2002 17:02:13 -0500 > > > > > > > > > > > > > > > >Murali, > > > > > > > > > > > > > > > >To increase the storage pool, need to define a > > volume to > > > >that > > > > > > > >storage pool. > > > > > > > > > > > > > > > >define volume <pool name> </path/volume name> > > > >formatsize=<#> > > > > > > > > > > > > > > > >The formatsize value is in megabytes and you only > > have to > > > > > >put a > > > > > > > >number. > > > > > > > > > > > > > > > >If you get a message that the diskpool is out of > > storage, > > > > > >check > > > > > > > >the actlog to see if migration started. If migration > > did > > > > > >start > > > > > > > >were there an error message about the tape library. > > > > > > > > > > > > > > > >Sias > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >________________________________________________ > > > > > > > >Get your own "800" number > > > > > > > >Voicemail, fax, email, and a lot more > > > > > > > >http://www.ureach.com/reg/tag > > > > > > > > > > > > > > > > > > > > > > > >---- On , murali ramaswamy > > ([EMAIL PROTECTED]) > > > > > >wrote: > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > actlog gives following type of message? How do I > > > > > >increase > > > > > > > >space > > > > > > > > > in storage pool? I have 4GB space on my machine > > and > > > >how > > > > > >can > > > > > > > >it say no > > > > > > > > > space? > > > > > > > > > > > > > > > > > > ANR0522W Transaction failed for session 194 for > > node > > > > > > > > > CLONE1 (WinNT) - no space > > > > > >available in > > > > > > > >storage pool > > > > > > > > > BACKUPPOOL and all > > successor > > > >pools. > > > > > > > > > 11/19/2002 13:20:00 ANR0403I Session 194 ended > > for > > > >node > > > > > > > >CLONE1 (WinNT). > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > -murali > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >_______________________________________________________________ > > > >_ > > > > > >_ > > > > > > > Add photos to your e-mail with MSN 8. Get 2 months > > FREE*. > > > > > > > http://join.msn.com/?page=features/featuredemail > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >________________________________________________ > > > > > >Get your own "800" number > > > > > >Voicemail, fax, email, and a lot more > > > > > >http://www.ureach.com/reg/tag > > > > > > > > > > > > > > > > > > > > >_______________________________________________________________ > > _ > > > >_ > > > > > MSN 8 with e-mail virus protection service: 2 months FREE* > > > > > http://join.msn.com/?page=features/virus > > > > > > > > > > > > > > > > > > > > > ________________________________________________________________ > > _ > > > MSN 8 with e-mail virus protection service: 2 months FREE* > > > http://join.msn.com/?page=features/virus > > > > > > > > > > > > > > > ________________________________________________ > > Get your own "800" number > > Voicemail, fax, email, and a lot more > > http://www.ureach.com/reg/tag > > _________________________________________________________________ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus
