most of those problems we had on 3583 library were due to magazines. after
firmware upgrade and
changing of magazines to "Revision B" everything went ok.
regards,
Burak Demircan
CEO / ITT
MERCEDES-BENZ TURK A.S.
[EMAIL PROTECTED]
tel:+90 212 482 35 00 (4676)
fax :+90 212 481 11 54
[EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
12.12.2002 13:48
Please respond to ADSM-L
� � � �
� � � � To: � � � �[EMAIL PROTECTED]
� � � � cc: � � � �
� � � � Subject: � � � �Re: Upgrading firmware on 3583 library and
3580 drives
On Thu, Dec 12, 2002 at 12:23:44PM +0200, Zlatko Krastev/ACIT wrote:
� � � � [rmdev/delete drive/delete library on firmware update]
> It ought to be not necessary. Do you have any problem?
We are currently doing an initial DR-test, and received an RS/6000 and 3584
library with four drives to do the test with.
However, we are having quite a few problems with the library and/or drives.
*Many* I/O errors, and last night the library gave a "-=> PERM ERROR! <=-"
and after that "-> TOO MANY ERRORS! <-" in its display.
The RS/6000 that the 3584 is connected to was installed with an mksysb of a
different type RS/6000. The TSM database was restored from a backup of our
production server. The IBM representative said that it could be a problem
that the drive and library firmware versions of our production system are
different from the firmware versions of the test system, and that this
could be the cause of all the errors.
--
Jurjen Oskam
PGP Key available at http://www.stupendous.org/
