Hi everybody! One short question for those who are experienced with Sun Solaris-Systems and FibreChannel addressing.
Can anybody tell me how can I access the FibreDrives in an 3584 Library? The following things we have done until now: - we enabled persistent bindung in 'lpfc.conf' (as you can see we are using Emulex) - we defined the tapes in 'st.conf' (because the application (Legato - I'm sorry) does not use the IBMtape-Driver there's no need for IBMtape.conf). ==> '/var/adm/messages' shows that Solaris finds the WWNs/drives/controlpaths. That far is ok. But did I configure the 'st.conf' right? Can I use any combination of Target ID and WWN in the st.conf? E.g.: target 0 for WWN 5005..... and so on or must I link the WWN for the first tape in the first frame with target 0 and so on. Because the addressing seems only to happen via the Loop-ID I am really confused. So: how do I map the loop-ID of the drives to the appropriate SCSI-ID a Sun system can use? Thanx in advance. ----- Mit freundlichen Gr�ssen / with regards Karsten H�ttmann ---------------------------------------------------------- Karsten H�ttmann c.a.r.u.s. Information Technology AG Advanced System Center Bornbarch 9, 22848 Norderstedt, Germany E-Mail: [EMAIL PROTECTED] Firma: +49.40.51435.3231 Mobil: +49.171.7634388 Fax: +49.40.51435.1111
