Hi, Has anyone had the following troubles?
On a large restore (1.3 TB) SAP database using TDP for R/3. First issue - session with a SendW wait time that continues to increment until the CommTimeOut is reached then terminates the connection? The byte count never increases and the tape drive and the tape are held until it times out? Second issue - there are several MediaW errors that use up all the sessions but not all the drives? "3,172",Tcp/Ip,MediaW,1.0 H ,19.7 G,573,Node,TDP R3 WINNT,PV1,"Waiting for input volume(s): 890158,(3729 Seconds)", "3,173",Tcp/Ip,SendW,7.5 M ,9.5 G,491,Node,TDP R3 WINNT,PV1,"Current input volume(s): 890152,(1233 Seconds)",, "3,174",Tcp/Ip,Run,0 S ,14.0 G,485,Node,TDP R3 WINNT,PV1,"Current input volume(s): 890160,(210 Seconds)",, "3,176",Tcp/Ip,MediaW,1.3 H ,9.8 G,517,Node,TDP R3 WINNT,PV1,"Waiting for input volume(s): 890152,(4751 Seconds)",, "3,178",Tcp/Ip,SendW,0 S ,19.7 G,646,Node,TDP R3 WINNT,PV1,"Current input volume(s): 890159,(1073 Seconds)",, "3,179",Tcp/Ip,MediaW,2.0 M ,15.8 G,610,Node,TDP R3 WINNT,PV1,"Waiting for input volume(s): 890158,(122 Seconds)",, "3,181",Tcp/Ip,SendW,0 S ,22.0 G,708,Node,TDP R3 WINNT,PV1,"Current input volume(s): 890167,(210 Seconds)",, "3,363",Tcp/Ip,SendW,0 S ,7.9 G,460,Node,TDP R3 WINNT,PV1,"Current input volume(s): 890158,(3728 Seconds)",, "3,427",Tcp/Ip,Run,0 S ,445.5 K,719,Admin,WinNT,JET121,,, "3,428",Tcp/Ip,Run,0 S ,4.0 K,109,Admin,WinNT,JET121,,, "3,429",Tcp/Ip,MediaW,50.9 M ,3.3 K,362,Node,TDP R3 WINNT,PV1,"Waiting for input volume(s): 890152,(3053 Seconds)", "3,430",Tcp/Ip,SendW,0 S ,203.6 M,367,Node,TDP R3 WINNT,PV1,"Current input volume(s): 890153,(122 Seconds)",, Third issue is that we do 42 M/s on backups but the restores are only at 10 M/s. Information: Both servers are: Windows 2000 AS TSM 5.1.5.1 TDP for R/3 3.2.0.11 STK L700 library 7 9840 drives Dual Giganet backbone Thanks JET