Thanks a million. I will find out. Balanand
-----Original Message----- From: Chris Murphy [mailto:[EMAIL PROTECTED] Sent: Monday, February 24, 2003 11:58 AM To: [EMAIL PROTECTED] Subject: Re: Performence question on Network and switch w.r.t NFS AIX. >Now my question is: >1.Is it sufficient just to change mtu size on switch or we need to do some tuneing further on switch. >Thanks >Balanand Pinni Balanand, Which Supervisor engine does this Cisco 4000 switch have? Sup II does NOT support jumbo frames at all. Sup III does support them after IOS version 12.1(13)EW, but only on certain lines cards and on NON-blocking ports. This is an important point. I would advise you get in touch with your LAN engineer and work from there. If the switch does not support the frames (i.e . Sup II) it will simply drop them. This could be causing some of the performance problems. Chris Murphy IT Network Analyst Idaho Dept. of Lands Office: (208) 334-0293 [EMAIL PROTECTED]