Perfect, this did it. Now, here is another questions, I tried checking the volumes that I placed on the I/O to be put in the libvol list but it does not find anything new. Here is exactly what I have done:
-- Setup->Utils->Config-> I/O to storage -- Reboot Library -- Put library offline once its up and place cardtriges in the I/O (now storage space slots) window -- Run the following command: checkin libvol lto3583.0 search=yes status=scratch -- It finishes successfully but it does not checkin any of the new 12 tapes placed on the library I/O window. Thanks in Advance, Camilo Marrugo On Tue, 2003-02-25 at 06:10, Richard Sims wrote: > > I have a question, I am running out of physical space on my > > 3583 library, and I was wondering if there is a way of making > > the 12 slots on the I/O station (Bulk), part of the regular > > tape slots. > > The manual, of all things, says you can... > via Setup->Utils->Config. > -- Camilo A. Marrugo Data Storage Manager Dialtone Interland [EMAIL PROTECTED] - http://www.dialtone.com Voice: 1.800.621.8309 ext. 1503 Toll Free Confidentiality Note: The information transmitted is intended only for the person or entity to whom or which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of this information by persons or entities other than the intended recipient is prohibited. If you receive this in error, please delete this material immediately.