Hi. Are you using the Gresham EDT software? If so, you can definitely use multiple ACSLS servers. There is information in the EDT Users Manual on how to go about it, you basically set up your rc.edt to talk to multiple ACSLS servers with a separate port assigned for each ACSLS server.
If you're talking about TSM libtype=acsls, I really don't know, but the rc.acs_ssi that you configure doesn't say anything about being able to configure multiple ACSLS servers. Alex Paschal Freightliner, LLC (503) 745-6850 phone/vmail -----Original Message----- From: Remco Post [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 25, 2003 5:06 AM To: [EMAIL PROTECTED] Subject: Multiple ACSLS servers? Hi all, currently we have in our TSM environment one ACSLS server and a 3494. We are thinking of adding a second STG9310 powederhorn on a remote site with it's own ACSLS server (the 9310 is shared, as will the second 9310 be, so we do need ACSLS), I've been digging around in the configuration files for TSM with ACSLS, but I'm not convinced that it is possible to have one TSM server use two ACSLS servers, is anybody doing this, and if so, how do I configure for this configuration (samples would be usefull)? -- Met vriendelijke groeten, Remco Post SARA - Stichting Academisch Rekencentrum Amsterdam http://www.sara.nl High Performance Computing Tel. +31 20 592 8008 Fax. +31 20 668 3167 "I really didn't foresee the Internet. But then, neither did the computer industry. Not that that tells us very much of course - the computer industry didn't even foresee that the century was going to end." -- Douglas Adams
